The Nazgul5 HD V3 is loaded with lots of power; it comes with the XING-E Pro 2207 6S motors, BLITZ F722 FC, and BLITZ E45S 45A 4-in-1 ESC, which makes this quad a must-have! Now with the DJI O3 Air Unit!

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in bold.)

• XING-E 2207 motors and NAZGUL 5140 props
• 5" version also fits 5.1" style propellers
• Fits both 30.5x30.5 and 20x20 stacks
• 5mm arm design for more durability
• Popular True-X configuration
• LED illuminated Logo
• DJI O3 HD System
• TPU crash-guards
• Easy-Swap arms

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Operating Temperature Range：-10° to 40° C (14° to 104° F)
• Max Wind Speed Resistance: 130 Km/H (Level 4)
• Receiver: DJI BNF, ELRS, or TBS Crossfire
• Dimensions (L×W×H): 180×180×80 mm
• Max Speed: 130 Km/h (Manual Mode)
• Video Transmission: DJI O3 Air Unit
• Maximum Takeoff Altitude: 5000 m
• Product Name：Nazgul5 V3 6S HD
• ESC: BLITZ E45S 45A 4-IN-1 ESC
• Max Hover Time: Approx. 8 mins
• Motor: XING-E Pro 2207 motors
• Takeoff Weight: Approx. 620 g
• Prop: Nazgul 5 inch propellers
• Diagonal Distance: 245mm
• Frame: 255mm wheelbase
• Max Flight Distance: 5 km
• Antennas: 2 Antenna
• FC: BLITZ F722
• GNSS: N/A

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x iFlight Nazgul5 V3 HD 5" FPV Freestyle BNF w/ DJI O3 Air Unit - 6S (Pre-Built, Tuned, and Tested)
• 2x Nazgul 5 inch propellers (Set of 4)
• 2x Battery Pad
• 2x Antenna

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS