iFlight is proud to offer the Cidora SL5 5" FPV Racing Drone, which comes with two different KV motors: XING Camo X2306 2450KV (4S) or 1700KV (6S).  The installed and pre-tuned SL5 is 5" is a fully built drone that comes with everything you need to liftoff, all you need to do is add your own receiver!

NOTE: The Hero 7 camera and TPU print camera mount are NOT included. 

Features

• Full 3K Carbon Fiber airframe
• Easy arm swaps -215mm wheelbase，115g
• Popular Squish X configuration
• SucceX F7 TwinG Bluetooth with 50A 4in1 ESC stack

Specifications

• Total Dimensions: 165*138mm (body dimension)
• Frame Wheelbase: 215mm
• SucceXF7 TwinG Bluetooth FC
• SucceX 50A 2-6s 4-in-1 ESC Dshot1200
• XING CAMO X2306 2450KV (4S )/ XING CAMO X2306 1700KV(6S)
• Caddx.us Ratel 2.1mm FPV cam
• Nazgul 5140 propellers
• Weight: 384.2 (without GoPro TPU mount)

SucceX F7 TwinG BT Flight Controller(TwinICM20689)

• MCU：216MHz STM32F722RET6
• Gyro: 2x ICM20689（SPI）
• Baro: Yes (Altitude on your OSD)
• Betaflight OSD：YES
• Bluetooth wireless adapter (Antenna integrated, can be linked to the SpeedyBee smartphone app)
• Blackbox: Onboard 32MB
• 5x UARTs
• 8x Motor outputs
• 8-pin 4in1 ESC port
• 4-pin VTX connector

Betaflight

• Betaflight Firmware：betaflight_4.0.5_STM32F7X2.hex
• CLI dump file：IFLIGHTF7_TWIN_G.config

Physical

• Mounting hole：30.5*30.5mm，φ4mm with Grommets φ3mm
• Size：36*36mm
• Weight：6.2g

SucceX 50A 2-6S 4-in-1 ESC Dshot1200

• Dimension: 43*39mm
• Mounting Holes: 30.5*30.5mm/Φ3mm
• Weight:14.4g
• Volts input: 2-6S
• STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
• Current sensor: Yes
• Telemetry：Supported
• BEC: No
• Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
• Target: iFlight-BL32-4IN1
• BLHeliSuite download (BL32):http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

SucceX the Force 5.8G 800mW VTX

• Tramp telemetry with OSD/Lua script frequency and output power control
• Stable power transmission, ideal for long-range flights
• Power settings 25mW/200mW/400mW/800mW
• 48 Channels including Raceband
• Frequency fast lock, soft start to reduce interference with other pilots
• Built-in output power self-check function;
• Full format video format: NTSC /PAL;
• Wide input voltage range. low power consumption:
• 7V～28V，+12V/500mA@1000mW;
• Small size: 36mm×36mm×8mm;
• Mounting holes 4-M3
• Lightweight: ≤11g(excluding antenna)

Recommend Parts (Not Included)

• TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter
• TPU 3D Printed Camera Mount for GoPro Session

Recommend batteries (Not Included)

• 4S 1300mAh to 2000mAh
• 6s 1050mAh to 1500mAh

Note: You must add your own receiver

Includes

• 1 x Cidora SL5 4S 6S FPV Drone - PNP
• 2 x Nazgul 5140 propellers
• 1 x LED Lights