The iFlight BLITZ F7 V1.2 Flight Controller now has a new gyro, improved circuit design, better components, and lower noise level!

Features

• (Jan 2024) Version updated to V1.2 / Gyro changed to ICM42688.
• Improved circuit design, better components, and lower electrical noise!
• DJI HD VTX Connector (Plug-and-Play / No soldering required)
• FC indicator LEDs for visual debugging
• With LC filter

BUILD TIPS

• SBUS, CRSF, ELRS, IBUS, DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
• Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
• F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2
• F722 MCU has an inner inverter.

WIRING

• UART 1 for VTX HD / Analog
• UART 2 for a Receiver
• UART 3/4/5 for GPS or other sensors that require a serial port
• UART 6 for ESC Telemetry

Specifications

• Mounting Pattern: 30.5*30.5mm / 4mm PCB hole diameter
• Model: BLITZ F722 V1.2 FLIGHT CONTROLLER
• SmartAudio / IRC Tramp VTX protocol supported
• Firmware target: IFRC-IFLIGHT_BLITZ_F722
• Motor outputs: 4x (SH1.0 connector)
• Flash: 32MB (Blackbox flash)
• I2C serial: SDA / SLA pads
• Dimensions: 36.5*35 mm
• OSD Chip: AT7456E
• Barometer: DPS310
• MCU: STM32 F722
• LED controller: Yes
• Beeper pad: Yes
• Gyro: ICM42688
• Weight: 7.8g
• UARTS: 6
• BEC: 5V 2.5A / 9V 2A

Includes

• 1x iFlight BLITZ F7 V1.2 Flight Controller
• FC Connecting Cables
• 1x Silicone Grommet Set