Introducing the GEPRC Crocodile75 V3 Analog RTF, a high-performance, long-range FPV drone ready to take your cinematography to the next level. With a durable GEP-LC75 V3 frame boasting a 342mm wheelbase, this drone is built for stability and longevity. Equipped with an SPAN F722-BT-HD V2 FC, SPAN G50A BLHeli_32 4IN1 ESC, and a powerful SPEEDX2 2806.5 1350KV motor, it guarantees exceptional flight performance and a thrilling flight time of 12-30 minutes. Capture breathtaking aerial footage with the Caddx Ratel 2 camera. Elevate your FPV experience with the Crocodile75!

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• The design features a revamped appearance with an enhanced fuselage structure, minimizing gyroscope sampling disruptions caused by fuselage vibrations.
• It utilizes the SPEEDX2 2806.5 1350KV motor alongside the HQ7.5×3.7×3, ensuring power and efficiency.
• The ESC has been upgraded to the SPAN G50A BLHeli_32 4IN1.
• Protective side panels have been added to shield the electronic control system from potential sand and dust interference.
• The battery plug's integration with the body offers a streamlined power-on process, achieving functionality and aesthetics.
• The extended fuselage of the Crocodile75 V3 accommodates either a Lipo 6S 3300mah-4500mah or a Lion 6S 6000mah battery.
• It is compatible with 7-inch or 7.5-inch propellers.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Model: Crocodile75 V3 Analog
• Frame: GEP-LC75 V3
• Wheelbase: 342mm
• Top plate: 2.5mm
• Bottom plate: 3.0mm
• Arm plate: 6.0mm
• Splint plate: 2.5mm
• FC: SPAN F722-BT-HD V2
• ESC: SPAN G50A BLHeli_32 4IN1
• MCU:STM32F722RET6
• Gyro: ICM 42688-P
• OSD: Betaflight OSD w/AT7456E chip
• VTX: GEPRC RAD 5.8G 1.6W
• Camera: Caddx Ratel2
• GPS: GEP-M8U
• Antenna: Momoda 5.8G RHCP RP-SMA 120mm
• Motor: SPEEDX2 2806.5 1350KV
• Propeller: HQProp7.5×3.7×3
• Weight: 597.5g
• Receiver: PNP / TBS NanoRX / GEPRC ELRS 2.4G / GEPRC ELRS 915
• Recommended battery: Lipo 6S 2600mah-4200mah / Lion 6S 6000mah
• Flight time: 12-30 min

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1 x Crocodile75 V3 Analog
• 4 x HQProp7.5×3.7×3
• 2 x M20*250mm battery straps
• 2 x Battery Silicone Pads
• 1 x Set of screws
• 1 x L-shaped screwdriver (1.5mm)
• 1 x L-shaped screwdriver (2mm)
• 1 x L-shaped screwdriver (3mm)
• 1 x M5 wrench
• 1 x GEPRC Keychain
• 1 x GP Camera Base

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS