The Dragon Link Nano Receiver is a full range, fully filtered, fully shielded, full feature, full telemetry receiver. Dragonlink used the highest quality components and spent the extra money on filtering to give you the best performance possible from this receiver. Filtering and shielding are even important on small planes and copters where interfering components are placed closely together. This Nano Receiver is built rugged, to withstand the crashes and abuse that frequently happens to small FPV planes and copters. The Dragon Link Nano Receiver receiver costs a bit more than the competition, but will actually save you money the first time it survives a crash, where you would need to replace a cheap, fragile, poorly made "disposable" receiver.
Why put a 60 Kilometer capable receiver on a small plane or copter? Because interference on small FPV planes and copters is even worse due to the very close spacing of receivers to video cameras, transmitters, etc. Antenna mountings are also never ideal. You can have a lot of things working against your system, and even if you lose 2/3 ( most of your range ), that still gives you 20km range. You can also penetrate obstacles, buildings, etc, and never even have to worry about RC signals, failsafes or even glitches. Perfect control will just always be there!
The Dragon Link Nano Receiver is compatible with ALL Dragon Link V3 systems. GPS and telemetry inputs mean that you can use the Nano Receiver for anything from Basic Control to full telemetry systems. Special programming for Pixhawk, Vector, and GPS telemetry is included. The Receiver outputs PPM, SBUS, and XBus for use with all flight controllers.
- Size: 25mm X 15mm X 10mm
- Weight: 6g with Antenna
- Voltage: 5 - 8 Volts
- Range: 60 km with an ideal setup
- 1x Nano Reciever with Wire Antenna
- 2x Antenna Tubes
- 2x Zip Ties
- Additional Information
SKU 9052 Manufacturer DragonLabs UPC (GTIN) No