Diatone Mamba Basic Stack - F405 Mini MK3.5 FC + F30 30A BLHeli_S Mini ESC
$78.99
Out of Stock
Only left for same day shipping. Order now!
Diatone Mamba Basic Stack - F405 Mini MK3.5 FC + F30 30A BLHeli_S Mini ESC
The Diatone Mamba F405 Mini MK3.5 30A Basic Stack brings BIG power all in a 20x20 mounting size! This stack can push 30A all while bringing you the latest features!
About this product
The Diatone Mamba F405 Mini MK3.5 30A Basic Stack brings BIG power all in a 20x20 mounting size! This stack can push 30A all while bringing you the latest features!
Features
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
- The standard flight controller (30.5×30.5) adds a spare pad
- Self-recovery insurance to the receiver's 5V power supply
- LED signal selection (when Mamba Led sys avaiable)
- Increased camera VCC power supply pad
- TVS instant high voltage protection 30V
- F405 models support F.prot
- BEC short circuit protection
- Super Big Soldering Pad
- Increased pad area
Updates
- When you connect the USB, the receiver and OSD settings can be saved
- The pad area of the Mini flight controller (20×20) increased by 140%
- Upgraded anti-interference cable
- Added I2C function
- Use TypeC

Specifications
MAMBA Basic F405MINI MK3.5 FC
- MCU: 168MHz STM32F405RGT6
- Blackbox: 16M Flash Memory
- Input: 2~6S Lipo (8.4~25.2V)
- BEC:3.3V 0.5A& 5V 2.5A
- ESC Soft: Dshot300/600
- MOUNTING: 20mm, M2
- LED Controller: BF LED
- TVS Protection: Yes
- GYRO: MPU6000
- Power Led: Yes
- Barometer: Yes
- Uarts: 5 Set
- RSSI: Yes
- Buzz: Yes
- OSD: Yes
MAMBA F30 MINI ESC
- CONTINUE CURRENT: 30A×4
- High-Frequency 470uF/35V ×1
- BURST CURRENT: 40A (10S)
- INPUT VOLTAGE: 3~5S Lipo
- Target:BLHeli_S CH40
- MOUNTING: 20mm, M2
- AMASS Original XT30
- SOFT: Dshot300/600
- TVS Protection: Yes
- BEC: No
Includes
- 1x MAMBA Stack Basic F405 Mini MK3.5 30A
- 2x 16AWG 60mm Cable
- 2x 8pin sh1.0
More Information
| SKU | 15942 |
|---|---|
| UPC (GTIN) | 736952007438 |
| Manufacturer | Diatone |
| Country of Manufacture | China |
| NDAA Compliant | No |
| Mounting Pattern | 20x20mm |
| Amps | 30 Amps |
| Flight Controller Processor | F4 |
| Voltage | 3-6 Cell (11.1v-22.2v) |
| ESC Firmware | BLHeli_S |
| Number of ESC's | 4 ESC's in 1 |