Diatone's Mamba series gives racers an edge in the competition! The latest F7 MK1 processing technology means you can focus on flying, not on the limits of your equipment.

Features

MK1 UPDATES

• Add 4 corner LED interface to support BF led and Mamba led
• Add 2812 LED switch function, the key can turn off led
• Upgrade to stronger type-C, optimize pad position
• The USB power supply can use the receiver, OSD
• Add inverter Dual-Way TX serial port
• Add a group of I2C pads (SCL SDA)
• BT to WiFi

Specifications

• MCU: 216MHz STM32F722RET6 32BIT
• Receiver: TBS/SBUS/IBUS/DSM
• Mounting Pattern: 30.5x30.5 M3
• Config_file: MAMBAF722_12C
• ESC Soft: Dshot300/600/1200
• Blackbox: 16M Flash Memory
• Dimensions: 38x41.5x7.5mm
• WIFI: Yes / SpeedyBee APP
• BEC 5V (System Power) 
• TVS Protection: Yes
• Smart audio: Yes
• Buzzer Pad: Yes
• CURR Pad: Yes
• IMU: MPU6000
• OSD: AT7456E
• RSSI Pad: Yes
• Soft: Betaflight
• BEC 3.3V: .5A
• Input: 6S LiPo
• S/F Port: Yes
• Motor: 4Set
• Uarts: 6Set
• BEC 9V: 3A

LED INDICATOR GUIDE

• Orange: MCU
• Green: VCC
• Blue: Gyro
• Green: 9V
• Red: 3.3V
• White: 5V

About WIFI APP

Note: The STM32F722 generates much heat, please leave at least 5mm on both sides of the FC to give good air circulation.

Includes

• 1x Diatone Mamba F722 APP MK1 Flight Controller