Now you can replace your soft plastic DJI arms with strong G10 arms with Aluminum mount that are CNC machined to produce a stiff, no-flex arm alternative. Many aerial videography airframes utilize cheap and low quality DJI plastic arms. These DJI arms have lots of flex, easily break, and can't mount larger pancake type motors. The Lumenier G10 arm now provides a much stronger alternative. The Lumenier G10 arm can also mount larger pancake motors such as the popular Tiger Motor MT-4006, Lumenier FM-4006, or Lumenier FX-4006 and offers optional landing gear.

Please note that you will need the Lumenier DJI arm Mounting hardware kit, which is not included with this arm and sold separately here. This enables us to offer lower cost G10 arms in case you need crash replacements for which the same hardware aluminum mount can be used.

Notes for using these arms on different airframes

While the arm length and mounting holes are identical to regular DJI plastic arms, the back of the arms are slightly thicker/stronger. This may cause binding of internal frame components. This might be resolved by adjusting the binding arm post with a Dremel -- if needed.

Discovery -- On a TBS Discovery, certain lipo sizes can bind with the back arms and shorten the lipo cavity. In our testing with a 3300mah lipo we did not notice negative CG impact. The Discovery also has solder pads in the location of one of the arm's foot. To make the arm work, you will need to open the bottom of the arm. See the picture in the product pictures that describes this modification.

Discovery Pro -- On a TBS Discovery Pro, the new vibration dampening system might bind with one of the arm's aluminum posts.

Specifications

• Weight: 68g for arm with mounting hardware (standard DJI arm weighs 54g)
• Length: 8.5" (inches). Same as standard DJI arm
• Suitable For: TBS Discovery, TBS Discovery Pro, DJI F450, DJI550, and similar

Note: Please note that using these arms on a TBS Discovery will require you to slightly modify one of the aluminum mounts with a Dremel so as to not cover up the lipo connection pads.

Includes

One CNC machined G10 arm. Requires mounting hardware kit (sold separately).

Landing Gear

We offer 2 different lengths Delrin snap-on landing gear sets for these arms (see below). For a TBS Discovery, we recommend the 'long' version of this landing gear to provide much more clearance than standard DJI arms.