Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance.
The Cobra CM-1806 series motors have a 2.0mm motor shaft, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 1806 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 12x16mm pattern on the back plate for easy installation on your model.
The CM-1806 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.
Included with every Cobra CM-1806 Series Motor is a complete accessory package which contains the following items:
● Four M3x5mm Motor Mount Screws
● Four M3 Flat Washers
● Machined Aluminum Prop Washer
● Locking Prop Nut with Nylon Insert
Click here for the Cobra CM-1806/30 2450Kv Propeller Data Chart
Cobra CM-1806/30 Motor Specifications Stator Diameter 18.0 mm (0.709 in) Stator Thickness 6.0 mm (0.236 in) Number of Stator Slots 12 Number of Magnet Poles 14 Motor Wind 30 Turn Delta Motor Kv Value 2450 RPM per Volt No Load Current (Io) 0.475 Amps @ 10 Volts Motor Resistance (Rm) per Phase 0.147 Ohms Motor Resistance (Rm) Phase to Phase 0.098 Ohms Maximum Continuous Current 12 Amps Max Continuous Power (3-cell Li-Po) 135 Watts Max Continuous Power (4-cell Li-Po) 175 Watts Motor Weight 21.0 grams (0.74 oz.) Outside Diameter 23.0 mm (0.906 in.) Motor Shaft Diameter 2.00 mm (0.079 in.) Prop Shaft Diameter 5.00 mm (0.197 in.) Motor Body Length 15.1 mm (0.594 in.) Overall Shaft Length 33.1 mm (1.303 in.) Motor Timing 5-10 degrees PWM Frequency 8-20 KHz
Motor Performance Graphs
The following downloadable PDF files show the performance data curves of the Cobra CM-1806/30 motor, over its entire throttle range, with a variety of propellers. These graphs can be downloaded and printed to use as a reference for calculating power requirements at specific thrust levels, and enable the user to calculate flight times, current draw and other motor parameters.
3-Cell Li-Po Power
- Cobra CM-1806/30 Performance Data with HQ 4x4x3 prop on 3S Li-Po
- Cobra CM-1806/30 Performance Data with HQ 4x4.5-BN prop on 3S Li-Po
- Cobra CM-1806/30 Performance Data with HQ 5x4 prop on 3S Li-Po
- Cobra CM-1806/30 Performance Data with HQ 5x4.5 prop on 3S Li-Po
- Cobra CM-1806/30 Performance Data with HQ 6x3 prop on 3S Li-Po
4-Cell Li-Po Power
- Cobra CM-1806/30 Performance Data with HQ 4x4.5 prop on 4S Li-Po
- Cobra CM-1806/30 Performance Data with HQ 5x3 prop on 4S Li-Po
Performance Graph Instructions
This downloadable PDF file shows the step by step process to use for interpreting the data shown in the Motor Performance Graphs. By following this procedure, you can determine how to select a proper motor for a Multirotor aircraft, as well as calculate required power levels, determine overall prop efficiency and calculate expected flight times based on the battery size that is used. This document can be printed out and saved as a valuable reference tool to keep in your workshop for future use as well.
Motor Performance Graph Instructions
- Additional Information
SKU 4759 Manufacturer Cobra UPC (GTIN) 721248871398 Popo Compatible No
Regular Price: $23.99
Special Price $9.99
Regular Price: $19.99
Special Price $14.99