Introducing the ChaddRainsFPV O4 Armer.

If you've ever wanted to add HD FPV to an RC car, boat, plane or anything else without a flight controller, the O4 Armer is exactly what you need!

The DJI O4 video system will not output its full power unless there is an 'armed' signal sent to it, like you'd get from a flight controller. The O4 Armer sends this 'armed' signal after being powered on for ~20 seconds, automatically.

Just plug in your O4 Air Unit with its stock cable, power the O4 Armer from a 2S-4S LiPo and you're set. There is also a JST-XH connector for a 5V fan to keep your O4 cool, and an optional solder pad which accepts a PWM input, allowing you to turn the O4 Air Unit on/off and toggle low/high power mode.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: FINALLY RELEASING MY FIRST PRODUCT ON YOUTUBE!! - THE O3 ARMER

• Made in Collaboration between ChaddRainsFPV & MustardTiger
• Works with O4 and O4 Pro Air Unit
• Backwards Compatibility with O3 Air Unit
• Affordability
• Versatility

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Function: Flight Controller Replacement
• Manufacturer: ChaddRains
• Make: O4 Armer
• Color: Board

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x ChaddRainsFPV O4 Armer

VIDEO: HOW TO USE O3 ARMER REV1

ADD VIDEO TITLE HERE IN BOLD CAPS