BetaFPV TWIG XL 3'' FPV Toothpick Quadcopter V1

BetaFPV TWIG XL 3'' FPV Toothpick Quadcopter V1

BetaFPV TWIG XL 3'' FPV Toothpick Quadcopter V1
TWIG XL 3'' FPV Toothpick Quad is the first joint quad with Racer X FPV.

About this product

The BetaFPV TWIG XL 3'' FPV Toothpick Quad V1 is the first joint quad with Racer X FPV, but not the last one!

This TWIG XL X version frame is definitely the most popular frame at present. The performance and power to weight ratio of this frame design are out of this world! With the Caddx Ratel Camera, 1404 3800KV Brushless Motors, 12A Toothpick F4 2-4S AIO FC, it supports 450mAh 4S battery and provides you super-efficient flight experience. What's more, we utilized an injection-molded canopy, protecting your camera well even in several severe crashes.

Note: Battery is NOT included.


Flight Controller

Toothpick F4 2-4S 12A AIO FC- Integrated with a Betaflight MATEKF411RX processor FC, Betaflight OSD, and 2-4S 12A ESC, support 4S battery for the fast-flying experience.

Camera & VTX

The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18" HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.

Specification of Camera

  • Image Sensor: 1/1.8" Inch starlight HDR sensor
  • Horizontal Resolution: 1200TVL
  • FOV: 180 Degree
  • Min. Latency: 8ms
  • TV System: NTSC & PAL (changeable)
  • Image: 16:9 & 4:3 (changeable)
  • WDR: Super WDR (HDR)
  • Min. Illumination: Starlight
  • Synchronization: Internal
  • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio: >60dB (AGC OFF)
  • Video Output: CVBS
  • Camera OSD: Separate OSD
  • DNR: 3-DNR

Specification of VTX

A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

  • Output power: 25mW and 200mW (Adjustable)
  • Smart Audio function is included for radio control
  • Frequency: 5.8GHz 6 bands 37 channels

TWIG Frame

TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm. All the frames are approximately 140mm motor post to motor post and swing up to 3” props. The frames accommodate motor mounting for 4-hole 9x9 or 12x12 motor mounts.

Injection Molded Canopy

The micro canopy specially designed for a 19-20mm camera, which adopts an injection molded process and PE material, much durable than the original canopy.


  • 1 x TWIG XL 3'' FPV Quad
  • 1 x Gemfan 3016 3-Blade Props (4pcs)
  • 1 x Set of M2*7 screws

More Information

SKU 12013
Manufacturer BETAFPV
Item Returns This item can be returned

Also Purchased

BETAFPV Toothpick F4 2-4S 12A AIO Brushless Flight Controller
Back Ordered
Caddx Ratel Starlight 1200TVL HDR Low-Light Micro FPV Camera
Out of Stock
Out of Stock
BETAFPV A01 25-200mW 5.8GHz VTX
Out of Stock
Out of Stock
BETAFPV 450mAh 4S 75C Lipo Battery(2PCS)