The BETAFPV Pavo25 V2 is the revolutionary Cinewhoop that the product team has come up with after spending countless hours applying aerodynamics. The whoop duct can enhance an additional 200g thrust and a CNC 7075 Aluminum Y-shape standoff to eliminate distortion and bending during flight while also accommodating mainstream HD VTX and Naked Action Cams. The new powerful propulsion system boosts computational power for up to 8 minutes of flight time, guaranteeing it is the smoothest, most powerful, and most responsive flight among all 2.5" cinewhoops.

Choose a Receiver:

• ExpressLRS 2.4GHz
• TBS Crossfire
• PNP

Note: This quad is VTX Ready only - the FPV system is NOT included, but it does support DJI O3 Air Unit, Walksnail Avatar HD Pro Kit, Caddx Vista Kit/RUNCAM Link, or Analog cameras.

VIDEO: BetaFPV Pavo25 V2 Review // Battery Ejection // 8 Minute Flight

• F722 35A AIO Brushless Flight Controller
• Y-shaped CNC metal support
• 128K PWM frequency
• Exceptional mounting
• Seamless design
• COB light strip

CAMERA & VTX SYSTEM

The Pavo25 V2, as a Cinewhoop, boasts compatibility with a wide range of FPV cameras and HD VTX systems, making it highly versatile. It offers exceptional mounting capabilities and supports not only DJI O3, Walksnail, and HD VTX installations but also works seamlessly with lightweight cameras such as Naked GoPro 12, DJI Action 2, and InstaGo 3, thanks to the included injection-molded camera bracket.

POWERFUL PROPULSION SYSTEM

The 1505 4600KV Brushless Motor is designed for 4S 2.5'' quads, offering superb torque output performance. Combined with GF D63 3-Blade Propellers with a 1.5mm shaft and the F722 35A AIO V2 Flight Controller, it enables pilots to easily reproduce freestyle maneuvers, meet competitive drone competitions, and fulfill professionally shot film creation needs. This combination brings a superb flight experience and high-quality image output, elevating our Pavo25 V2 Brushless Whoop Quadcopter to a smoother and more stable flight level.

FLIGHT CONTROLLER

The F722 35A AIO Brushless Flight Controller comes with an F722 chip. This board provides great performance capability and a high processing speed of up to 128k PWM frequency. It also includes a built-in 16MB flash memory chip dedicated to Blackbox logging. Six full UARTs are available on this board. Featuring a 6-pin plug-and-play port, it can directly connect HD Digital VTX with NO soldering work required. With support for up to 2~6S input voltage, this FC pushes the FPV racer to the max, providing reliable and smooth flight for drones.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Support VTX (not included): DJI O3 Air Unit, Walksnail Avatar HD Pro Kit, Caddx Vista Kit/RUNCAM Link, Analog camera 
• Support Camera (not included): DJI O3, Avatar HD Pro Caddx, RUNCAM series 19mm & 20mm HD, Analog 19mm
• Frame: Pavo25 V2 Brushless Whoop Frame
• Battery Connector: Fixed XT30
• Item: Pavo25 V2 Whoop Drone
• RX Version: ELRS, TBS, PNP
• Props: GF D63 3-Blade
• Motor: 1506 | 4200KV
• FC: F722 35A AIO V2
• Flight Times: 6~8 min
• Wheelbase: 112mm
• FPV System: None

IMPORTANT NOTES

• The actual flight time depends on the flight environment and the flight mode.

• 1x BETAFPV Pavo25 V2 Cinewhoop Drone - No FPV System
• 4x GF D63 3-Blade Props 1.5mm Shaft (Transparent Gray)
• 1x Flight Controller Instruction Manual
• 1x COB Light Strip Accessory Pack
• 1x M5x18 Hex Button Head Screw
• 2x M2x8 Hex Button Head Screw
• 2x M2x5 Hex Button Head Screw
• 4x M2x4 Hex Button Head Screw
• 4x M1.6x8 Hex Flat Head Screw
• 4x M2x8 Hex Flat Head Screw
• 4x M2x3 Hex Flat Head Screw
• 1x M5x5 Anti-loosening Nut
• 1x H1.27 Hexagon Wrench
• 1x Camera Mount (Right)
• 1x Camera Mount (Left)
• 1x GoPro Mount
• 1x Service Card