The BETAFPV LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time. Additionally, this version supports the BETAFPV Configurator, a utility designed to simplify updating, configuring, and tuning the radio controller.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: BETAFPV LITERADIO 3 USER GUIDE, INSTRUCTIONS & BINDING

• Supports external TX modules
• Customized LiteRadio System
• Convenient Charging
• Ergonomic Design
• Simulator Support
• Long Battery Life
• Nano Bay Design

IMPROVEMENTS ON LITERADIO 3

Compared with LiteRadio 2 SE, the LiteRadio 3 is equipped with a 2000mAh 1S battery, providing excellent endurance performance of up to 15 working hours without an external module. It reserves a nano bay on the backside to support an external module, such as the ELRS Nano TX Module, which supports the CRSF protocol. Moreover, the LiteRadio 3 gimbal has been newly updated with accurate potentiometers and adjustable stick ends.

ABOUT LITERADIO 3

LiteRadio 3 is a remote control radio transmitter designed primarily for RC models, including multirotors and airplanes. It offers more than you ever thought possible from an entry-level 8-channel radio.

• Support Protocol: Futaba S-FHSS/FrSky FCC D16/FrSky LBT D16/FrSky D8, ExpressLRS 2.4G
• LED Light: Green - Power On / Red - Warning if the voltage is lower than 3.5V / Blue - Normal
• Power: ELRS version 25mW/50mW/100mW, FrSky version 100mW
• Support: BETAFPV Configurator / Most Practice Simulators
• Support: USB Charging / Firmware Update
• Adapted Drone Type: Multirotor, Airplane
• Battery: Built-in 2000mAh 1S Battery
• Charging Connector: USB 3.0 Type-C
• Item: LiteRadio 3 Radio Transmitter
• 2.4G System: CC2500/SX1280
• Frequency Range: 2.4G
• Channel: 8

IMPORTANT NOTES

• The default firmware of the LR3 (ELRS 2.4G) has been ELRS V3 since November 2023, replacing the previous version, ELRS V2.0. If you want to upgrade your old radio transmitter, please check this guide.
• Only the radio controller ExpressLRS 2.4G and FrSky 2.0 versions support the BETAFPV Configurator nowadays. We will upgrade to ELRS V3.0 as soon as possible.
• Switching the internal protocol is only available for the FrSky version radio transmitter. The ExpressLRS version can only switch to the external TX module.

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• BETAFPV Configurator Download Address
• BETAFPV V2.0.X Firmware
• Instruction Manual

• 1x BETAFPV LiteRadio 3 Radio Transmitter - ELRS 2.4GHz
• 1x USB Type-C Charging Cable
• 1x Manual

VIDEO: BETAFPV LITERADIO 3 | ALL THE RADIO YOU'LL EVER NEED

VIDEO: BETAFPV LITERADIO 3 REVIEW