HX115 HD 3-4S Freestyle Ripper, the first toothpick quadcopter with the high-definition camera in the market has come, which can shoot in 1080P video at 60FPS and capture the special moments in your flying life. It features toothpick F4 2-4S AIO FC paired with 1105 5000KV motor, enables you to experience the unparalleled boost in power and performance. For those of you who wanna rip in the backyard or blast through the sky, this beast is for you.
Note: Don't need HD? Check out the more affordable non-HD HX115 FPV Version.
HX115 comes with two versions at your disposal. If you prefer to enjoy HD video shooting at this 115mm little beast, the HD version is your best choice. If you just wanna experience freestyle with ultimate speed, please choose the FPV version. The following table is the specifications comparison.
- HX115 HD is the first HD toothpick drone at present which is installed with Caddx Baby Turtle Camera. With the features of 1080P/60fps HD recording, it brings you an unforgettable FPV flying experience.
- The first carbon fiber series installs Betafpv Toothpick 12A 2-4S AIO flight controller, which can reduce weight and size and makes it easier to work on and DIY without lots of messy soldering and wiring.
- More durable and aesthetic while maintaining minimal weight is achieved with a 4.2mm thickness carbon fiber unibody frame.
- Integrates with 1105 5000KV motor, HX115 offers unparalleled execution in thrust and control.
- Supports 3-4S battery. It has plenty of power and pushes to do all the tricks and flips you want. Our recommended power combination is that 3030 props with 450mAh 3S battery, while 3020 props with 450mAh 4S battery.
- Weight: 74.3g (without battery)
- FC&ESC：Toothpick F4 2-4S 12A AIO FC
- Motors: 1105 5000KV Brushless Motors
- Props: HQ 3020 2-Blade Props / HQ 3030 3-Blade Props
- Camera: Caddx Baby Turtle Camera
- VTX: A01 25-200mW 5.8G VTX
- Frame: HX115 T700 carbon fiber frame
- Canopy: Customized Canopy for HX115 HD
- Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
- Battery: 450mAh 4S battery / 450mAh 3S battery (NOT included)
- Flight time: Almost 5mins in a smooth flight
Toothpick F4 2-4S AIO Flight Controller
The first carbon fiber drone series that installs a new layout all-in-one Toothpick FC, makes this ideal for tight builds and achieves mini stack height. Possesses high-performance STM32F411CEU processor and tuned Betaflight MATEKF411 (MK41), which provides much more power on 2-4S.
HD Camera and A01 VTX
Caddx Baby Turtle Camera, Ultra-low weight 9g, gives you 1080p/60fps HD recording while also utilizing a sharp WDR FPV camera.
- Image sensor: 1/2.7Inch -CMOS sensor
- Resolution: 800TVL
- Recording: 1080P/60fps, 1080P/30fps
- Lens: 1.8mm lens
- FPC FOV/Recording FOV: 170
- TV system: NTSC/PAL changeable with OSD
- Video file format: MP4
- Aspect ration: 16:9/4:3 Changeable with OSD
- Max Micro SD card supported: 64G
- Audio: Support
- Illumination: 0.01Lux
- DNR: 3DNR
- WDR: YES
- Fly OSD: YES
HX115 T700 Carbon Fiber Frame
Newly structure design, R0.5 chamfer, and 4.2mm thickness make HX115 T700 carbon unibody frame become ultimate durability and aesthetic while maintaining minimal weight. It has applied upgraded T700 carbon fiber material, stronger crashworthiness compared to the initial T300 frame.
Power combination suggestion is that use 3030 props with 450mAh 3S battery and 3020 props with 450mAh 4S battery, switchable and affordable.
Note: We do NOT recommend using 3030 3-blade props with the 4s battery, it may burn your motor due to increased amp draw.
- 1 x HX115 115mm HD Quad
- 1 x HQ 3030 3-Blade Props (4pcs)
- 1 x HQ 3020 2-Blade Props (4pcs)
- 1 x Set of M2 screws
*Battery is NOT included. It comes with two sets of 3'' props without pre-installed, props at your disposal.
- Additional Information
SKU 11246 Manufacturer BETAFPV UPC (GTIN) No