The CQ3 is a powerful 4x charger that can handle up to 4x different kinds of batteries at the same time. The 4x independent back-lit LCD screens make charging cycles easy to start at different times. This charger includes an AC and DC power cable. Charge up your Li-Ion, LiPo, LiFe 1-6 series or NiCd, NiMH 1-15 cells with this fast charger.

Note: This charger is NOT designed for use with hybrid car batteries. Any such use will damage the charger and is not covered by warranty. Updated firmware since its release now allows this charger to support high-voltage charging.

• Four independent circuits support charging four different kinds of batteries at the same time
• New Firmware supports Li-HV charging
• Built for worldwide use
• Overloading protection
• Short circuit protection
• AC/DC dual input

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Color: Red/Black
• AC Input Voltage: 100-240V
• DC Input Voltage: 11-18V
• Charge Power: max.100W x4
• Discharger Power: max.10W x4
• Charge Current Range: 0.1-10.0A x4
• Discharge Current Range: 0.1-5.0A x4
• Balance Current: 400mA/cell
• LiPo/Li-Ion/LiFe Battery Cell Count: 1-6 Series
• NiCd/NiMH Battery Cell Count: 1-15 Cells
• Pb Battery Voltage: 2V-24V
• Weight: 1750g
• Dimensions: 220*240*68mm

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x EV-Peak BGUAD CQ3 Multi Charger 4x 100W NiMH / LiPO with Built-in Balance - Red/Black
• 4x Balancing Adapter Board XH
• 4x XT60 Charging Cable
• 1x XT60 DC Input Cable
• 1x AC Input Cable