This lightweight Brain3D 3D Printed Mount is made to hold the DJI O3 stock antenna. This design holds the antenna tube in by pressure. 

Note: Please measure the frame where you want to mount this antenna mount and measure the standoff width from center to center of the bolt holes. Choose the Standoff Width accordingly. 

VIDEO: (Insert Video Title here in Bold)

• Various mounting pattern options for different standoff spacing
• High-Quality 3D Printing
• Lightweight Version

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Mounting Pattern Options (width of standoffs): 27, 31, or 33mm
• Compatibility: DJI O3 Air Unit Antenna
• Weight: 2.6 - 2.8g
• Color: Black

IMPORTANT NOTES

• The DJI O3 antenna has two wires coming out of the antenna tube. Push one of the connectors through the antenna mount hole and then you will be able to push the other connector in. Both connectors cannot push through at the same time. If you take the antenna out of the antenna mount please be very careful not to pull the connectors off the antenna wires.  

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Brain3D DJI O3 Lightweight Antenna Mount (Choose Standoff Width)

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS