Laminating and Finishing Epoxy.
FINISH-CURE™ 20 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistent to most chemicals.
FINISH-CURE™ is an excellent substitute for polyester finishing resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. NEVER apply in temperatures below 75℉.
For applaying lighter weight fiberglass, lay the cloth on the surface and brush FINISH-CURE™ through the cloth. For heavier cloth, apply the epoxy on the surface first, then brush FINISH-CURE™ through the cloth. Use a heat gun to accelarte the cure. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. FINISH-CURE™ can be sanded the easiest of all our epoxies. It works best for the sheeting of all but the largest of foam wings (apply FINISH-CURE™ to the wood and not to the foam). It is the best choice for applying cloth to the inside of epoxy fiberglass fuselages.
- 1x Epoxy
- 1x Hardener
- Additional Information
SKU 7339 Manufacturer BobSmithIndustries UPC (GTIN) 704817766653
No Air Shipping
Please note this product contains hazardous and or highly flammable material. We are not able to ship hazardous material via Air shipping method. This includes all international destinations outside the USA. In the USA, you will only be presented with ground based shipping options if your order contains any such hazardous material. If you need to receive your order quickly and would like to ship with one day or two day shipping options, consider splitting your order up to separate hazardous material from everything else.