The RCX H1806 2400KV micro outrunner brushless motor is specifically designed for small multirotors. This is small yet powerful little motor, capable of running off a 2s or 3s battery setup and designed to run 5" props.

Testing shows this motor at full load demands between 6A - 8A current. So a >10A ESC is recommended (Lumenier 12 amp ESC with SimonK Firmware), a 6A ESC might be too low if you need to drive it very hard. This motor is compatible with the QAV250 Mini FPV Quadcopter (may require an M2x5 screw with larger head or washer and a litte modification to the QAV250 motor mounting plate).

The differences between RCX 1806 and H1806 are

• H1806 has 5mm Prop Shaft instead of 4mm (so you do not need an prop adapter)
• 2400KV with more power than 2300KV

Motor Specs

• Model: H1806-6
• KV: 2400KV
• Weight: Approx. 20g (depends on the cable length and prop mount)
• Prop Shaft Diameter: 5mm (no prop adapter is required for most 5mm props)
• Clockwise Screw Thread
• Stator Diameter: 18mm
• Stator Length: 6mm
• Shaft Diameter: 2mm
• Motor Dimensions: Φ23x18.5mm
• Max Continuous Current: Approx. 13A 
• ldle Current: 0.2A
• Internal Resistance: 325m
• Suitable ESC: 10-15A
• Suitable Battery: 2-3S Li-Po

Package Contents

1. 1 x RCX H1806-2 2400KV Micro Outrunner Brushless Motor
2. 1 x Set of Prop Mount (T-Type & Standard)
3. 1 x Set of Screws