The TBS Source One V5 5" Frame Kit is a wide-stance, X configuration frame, and popular frame kit for freestyle or free-range acrobatic flying!  It is built to withstand harsh crashes and abuse. It fits and protects all the classic FPV components and is optimized for lightweight. The Source One is a perfect everyday workhorse for casual FPV flying and competitive freestyle.

ABOUT THE PROJECT

The Source One project is a first-of-its-kind collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers to integrate best practices and current trends into a continuously manufactured product. In return, TBS is allowing the local FPV community and distribution networks to have access to a cheap but good frame to help them compete in an increasingly predatory marketplace!

GET INVOLVED!

• 3D Printed Parts (STL) https://github.com/tbs-trappy/source_one/tree/master/3D%20Print%20Accessories
• 3D Printed files on Thingiverse: https://www.thingiverse.com/tag:sourceone 
• Build Guide: https://oscarliang.com/how-to-build-fpv-drone/
• Project discussion: https://discordapp.com/invite/ZJGkHwF
• Project files: https://github.com/tbs-trappy/source_one 

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

•  Wheelbase 5": 226
• Top Plate: 2mm
• Middle Plate: 2mm
• Bottom Plate: 2.5mm
• Arms Spacer: 6mm
• Camera plate: 2mm
• Standoff height: 30 and 22mm
• Arm thickness 5": 6mm
• Stack Mounting: 30.5 × 30.5mm & 20 x 20
• Weight 5": *123.5g

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

The recommended items were put together by TBS engineers and pilots. TBS strives for reliability and high quality in all of their selections, which may cost a bit extra but it allows you to enjoy the frame much more!

BUDGET BUILD (~$230)

• FC: Airbot F4 Fireworks V2, or HGLRC Titan 60A FC AIO
• ESC: 4x Flycolor Raptor 30A BlHeli-S
• Motors: 4x MasterPilot 2750kV or MasterPilot PRO 2750kV
• Camera: TBS Oblivion Camera
• VTx: TBS Unify Pro RACE or TBS Unify Pro HV SMA 800mW
• Antenna: TBS Linear Whip or TBS Triumph SMA
• Props: HQ V1S Props or Gemfan Hulkie or Gemfan Flash

TBS POWERCUBE BUILD (~$300)

• FC, ESC, VTx, OSD: TBS PowerCube FPVision 2in1
• Motors: 4x MasterPilot 2750kV or MasterPilot PRO 2750kV
• Camera: TBS Oblivion Camera
• Antenna: TBS Linear Whip or TBS Triumph SMA
• Props: HQ V1S Props or Gemfan Hulkie or Gemfan Flash

PRO FREESTYLE BUILD (~$350)

• FC: BrainFPV Radix & PDB
• ESC: 4x TBS BulletProof DSHOT600 25A ESC
• Motors: 4x ETHIX Mr.Steele SILK V2 2345kV Motor
• Camera: RunCam Swift 2
• VTX: TBS Unify Pro HV 800mW
• Antenna: TBS Linear Whip or TBS Triumph SMA
• Props: HQ V1S 5x4.5x3

•   (Insert links such as manuals, firmware, etc)

• 4x OD 5mm M3 30mm standoff
• 4x OD 5mm M3 22mm standoff
• 1x Screw & Standoff set
• 16x M3x10 Allen screw
• 8x M3 press insert nut
• 4x M3x12 Allen screw
• 4x M3x14 Allen screw
• 2x Camera Plate
• 1x Bottom Plate
• 1x Middle Plate
• 1 Arms spacer
• 1x Top Plate
• 1x Brace
• 4x Arms

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS