Welcome to GetFPV My Account My Wishlist Log In

New Products

GetFPV adds new products daily! Get ahead of the competition by purchasing the latest drone and FPV gear on our New Products page.

Set Ascending Direction

1-50 of 462

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Replacement Brass Washers for Motors - 4mm (10pcs)

    Replacement Brass Washers for Motors - 4mm (10pcs)

    These are 4mm (inner diameter) replacement brass washers that are used as a spacer on the bottom of the motor shaft to prevent vertical slop. These shims sit between the bearing and the C-clip or E-Clip.
    $1.59
  2. Happymodel EX1404 Motor - 2750KV/3500KV/4800KV

    Happymodel EX1404 Motor - 2750KV/3500KV/4800KV

    Give your quad maximum power with the Happymodel EX1404 Motor! This motor will surely meet your FPV needs!
    $11.49
  3. Shen Drones Thicc 2.0 7" Deadcat Frame Kit - DJI/Analog

    Shen Drones Thicc 2.0 7" Deadcat Frame Kit - DJI/Analog

    The Thicc 2.0 is a 390mm 7" X8 made to carry larger cameras like the Black Magic Pocket. The camera mounts with a 1/4-20 screw and straps. The Thicc 2.0 is a longer deadcat layout with superior flying characteristics to the original.
    $120.00
  4. Caddx Air Unit Micro Version for DJI Digital HD FPV System

    Caddx Air Unit Micro Version for DJI Digital HD FPV System

    The CaddxFPV Air Unit Micro Version is a 19x19 micro-sized camera with low-latency digital video transmission. The Air Unit Transmission technology utilizes a two-way communication system to stabilize signal connections, granting pilots more flexibility when flying through challenging areas.
    $189.00
     Add to Cart
    Pre-Order
  5. 3mm Aluminum Textured Standoff Spacers (Set of 6)

    3mm Aluminum Textured Standoff Spacers (Set of 6)

    These 3mm textured aluminum spacers are lightweight, threaded, anodized, and have a textured grip surface treatment which facilitates holding of the spacers during assembly and servicing of the airframe.
    $4.99
  6. 5mm Aluminum Textured Standoff Spacers (Set of 6)

    5mm Aluminum Textured Standoff Spacers (Set of 6)

    These 5mm textured aluminum spacers are lightweight, threaded, anodized, and have a textured grip surface treatment which facilitates holding of the spacers during assembly and servicing of the airframe.
    $4.99
  7. HGLRC AEOLUS 1303.5 2500KV/4500KV Motor

    HGLRC AEOLUS 1303.5 2500KV/4500KV Motor

    Give your quad maximum power with the HGLRC Aeolus 1303.5 micro motor! The Aeolus 1303.5 brushless motors are smooth and stable motors that support 4-6S batteries to meet pilots' FPV needs!
    $12.99
  8. HGLRC AEOLUS 2004 1800KV/3000KV Motor

    HGLRC AEOLUS 2004 1800KV/3000KV Motor

    Give your quad maximum power with the HGLRC Aeolus 2004 motor! The Aeolus 2004 brushless motors are smooth, powerful, thin, and light.
    $17.99
  9. HGLRC AEOLUS 1202.5 5600/8000/11600KV Motor

    HGLRC AEOLUS 1202.5 5600/8000/11600KV Motor

    Give your quad maximum power with the HGLRC Aeolus 1202.5 motor! Choose between three KV options (5600KV/8000KV/11600KV) to meet your FPV needs!
    $11.49
  10. T-Motor Carbon Fiber Foldable 28.2x9.2 (CCW+CW) Set

    T-Motor Carbon Fiber Foldable 28.2x9.2 (CCW+CW) Set

    Tiger Motor's new Carbon Fiber Foldable 28.2x9.2 Props are made with their patented design to improve efficiency for longer flight times and reduce wingtip vortices. The foldable design is excellent for storage and transport. These props are designed specifically to prevent sweepback while the props are in flight.
    $359.99
  11. Shen Drones Squirt V2.1 3" Cinewhoop Carbon Frame Kit w/ Hardware (No Ducts)

    Shen Drones Squirt V2.1 3" Cinewhoop Carbon Frame Kit w/ Hardware (No Ducts)

    This Cinewhoop Carbon Frame Kit is for the Shen Drones Squirt V2.1 3" ducted quad. The Squirt is a peppy flyer that can carry a Hero!

    Note: Ducts not included in this version.

    $37.99
  12. Shen Drones Squirt V2.1 3" Cinewhoop w/ Ducts - Variable Angle Hero 7/8 Mount - Analog/DJI

    Shen Drones Squirt V2.1 3" Cinewhoop w/ Ducts - Variable Angle Hero 7/8 Mount - Analog/DJI

    The Squirt V2.1 Cinewhoop is a 160mm 3" ducted quad. The ducts generate about 240g more thrust, so the Squirt is a peppy flyer that can carry a Hero! They also double as prop guards so it's safer to fly in close proximity to people.
    $94.99
  13. T-Motor VELOX F7 HD Flight Controller

    T-Motor VELOX F7 HD Flight Controller

    The T-Motor VELOX F7 HD Flight Controller comes with an integrated Bluetooth chip, so you can adjust FC parameters by directly connecting to the Speedy Bee App in your mobile device without configuration required. In addition to analog VTX, the VELOX F7 FC support the Caddx Vista Digital HD Camera and DJI Air Unit

    $39.99
     Add to Cart
    Back Ordered
  14. VAS Crosshair XTREME V2 1.3GHz Antenna

    VAS Crosshair XTREME V2 1.3GHz Antenna

    FPV’s favorite “patch killer” antenna is now even better. The new VAS Crosshair XTREME V2 1.3GHz Antenna is known for its power and penetration. With an increased axial ratio, gain, beamwidth, and bandwidth (thanks to an improved antenna element) the Crosshair XTREME will give you amazing range and clarity for your 1.3GHz system. The new patent-pending vector-phasing technology of the Crosshair™ Xtreme gives both longer range and better signal clarity. Designed to be a long-range/obstacle penetration antenna.
    $64.99
  15. FrSky Tandem X20 ACCESS 900M/2.4GHz Radio Transmitter (w/ R8 Pro , R9 MX & Handle Grip)

    FrSky Tandem X20 ACCESS 900M/2.4GHz Radio Transmitter (w/ R8 Pro , R9 MX & Handle Grip)

    The FrSky Tandem X20 Series is a dual-band telemetry radio that has great features such as a color touch screen display and an ergonomic design that provides unprecedented comfort when held. When combined with ETHOS, a completely new operating system, FrSky’s Tandem X20 Series provides users with a powerful, intuitive, and flexible experience to enjoy across the entire world of RC.
    $374.99
  16. FrSky Tandem X20S ACCESS 900M/2.4GHz Radio Transmitter (w/ R8 Pro , R9 MX & Handle Grip)

    FrSky Tandem X20S ACCESS 900M/2.4GHz Radio Transmitter (w/ R8 Pro , R9 MX & Handle Grip)

    The FrSky Tandem X20S Series is a dual-band telemetry radio that has great features such as a color touch screen display and an ergonomic design that provides unprecedented comfort when held. When combined with ETHOS, a completely new operating system, FrSky’s Tandem X20 Series provides users with a powerful, intuitive, and flexible experience to enjoy across the entire world of RC.
    $474.99
  17. TrueRC Vulcan MK II 5.8GHz Antenna

    TrueRC Vulcan MK II 5.8GHz Antenna

    Packing an awesome 18dBic punch, and now in an ultra-compact 103mm panel, the Vulcan MK II Antenna from TrueRC is pushing the limit! The “Vulcan II” is an array of four snipers adapted to work together as a single CP high-gain antenna.
    $169.99
  18. Rekon FPV Rekon3 Nano LR FPV Quad

    Rekon FPV Rekon3 Nano LR FPV Quad

    The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This means you can fit enough batteries to fly for several hours in your pocket! The Rekon3 is also extremely quiet and small.

    $149.99
  19. BetaFPV Pavo30 3" CineWhoop Drone (Analog)

    BetaFPV Pavo30 3" CineWhoop Drone (Analog)

    The Pavo30 Whoop Quadcopter is a 3-inch pusher drone developed by BETAFPV.
    $209.99
  20. BetaFPV Pavo30 3" CineWhoop Drone (HD)

    BetaFPV Pavo30 3" CineWhoop Drone (HD)

    The Pavo30 Whoop Quadcopter is a 3-inch pusher drone developed by BETAFPV.
    $309.99
  21. BetaFPV Cetus FPV Whoop Racing Kit - Brushed Version

    BetaFPV Cetus FPV Whoop Racing Kit - Brushed Version

    The BetaFVP Cetus Kit has everything you need to begin your flying experience! The highly anticipated Cetus FPV Kit is the best choice for FPV beginners to explore the FPV world and bring your family and friends into this hobby. The Cetus FPV Racing comes with the Cetus brushed whoop quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, which is everything you need to get up in the air!

    $159.99
     Add to Cart
    Back Ordered
  22. Lumenier QAV-S MINI 4" 4S Freestyle Quadcopter RTF - Shark Byte Edition

    Lumenier QAV-S MINI 4" 4S Freestyle Quadcopter RTF - Shark Byte Edition

    Introducing the Lumenier QAV-S MINI 4" 4S Freestyle Quadcopter RTF.- Shark Byte Edition! The QAV-S MINI 4" is the new addition to the QAV-S line and features functionality, simplicity, and ease of work.
    $419.99
  23. HQProp 40MM 2-Blade Micro Whoop Propeller - 1.5MM Shaft (Set of 4 - Gray)

    HQProp 40MM 2-Blade Micro Whoop Propeller - 1.5MM Shaft (Set of 4 - Gray)

    These HQProp 40MM 2-Blade Propellers are perfect for your Micro Whoop builds!
    $2.25
  24. Shen Drones Siccario Cinelifter 3D Printed Parts

    Shen Drones Siccario Cinelifter 3D Printed Parts

    These 3-D printed parts are specifically designed for the Shen Drones Siccario Cinelifter... a 405mm X8 designed to optimize weight distribution for ideal flight characteristics.
    $20.00
  25. Shen Drones Siccario Cinelifter Z Cam Mount

    Shen Drones Siccario Cinelifter Z Cam Mount

    This Z Cam mount is specifically designed for the Shen Drones Siccario Cinelifter... a 405mm X8 designed to optimize weight distribution for ideal flight characteristics. The Siccario has upswept 10mm arms that put the line of thrust right through the heaviest part of the drone, the camera.

    $40.00
     Add to Cart
    Back Ordered
  26. Shen Drones Siccario Cinelifter Komodo Camera Mount

    Shen Drones Siccario Cinelifter Komodo Camera Mount

    This Komodo camera mount is specifically designed for the Shen Drones Siccario Cinelifter... a 405mm X8 designed to optimize weight distribution for ideal flight characteristics. The Siccario has upswept 10mm arms that put the line of thrust right through the heaviest part of the drone, the camera!
    $120.00
     Add to Cart
    Back Ordered
  27. Shen Drones Siccario Cinelifter Base Frame w/ Alpha Gel Dampers

    Shen Drones Siccario Cinelifter Base Frame w/ Alpha Gel Dampers

    This Cinelifter Carbon Fiber Base Frame is specifically designed to build the Shen Drones Siccario Cinelifter... a 405mm X8 designed to optimize weight distribution for ideal flight characteristics. The Siccario has upswept 10mm arms that put the line of thrust right through the heaviest part of the drone, the camera.
    $375.00
  28. Shen Drones Siccario Cinelifter Base Frame w/ Silicone Dampers

    Shen Drones Siccario Cinelifter Base Frame w/ Silicone Dampers

    This Cinelifter Carbon Fiber Base Frame is specifically designed to build the Shen Drones Siccario Cinelifter... a 405mm X8 designed to optimize weight distribution for ideal flight characteristics. The Siccario has upswept 10mm arms that put the line of thrust right through the heaviest part of the drone, the camera.
    $350.00
  29. Shen Drones Insider 4" Cinelifter Full Kit w/ Ducts

    Shen Drones Insider 4" Cinelifter Full Kit w/ Ducts

    The Shen Drones Insider 4" Cinelifter Kit is a spinoff of the Shen Drones Dualist with some freshly added details.
    $200.00
  30. Shen Drones Insider 4" Cinelifter Carbon Frame Kit w/ Hardware (No Ducts)

    Shen Drones Insider 4" Cinelifter Carbon Frame Kit w/ Hardware (No Ducts)

    The Shen Drones Insider 4" Cinelifter Frame is a spinoff of the Shen Drones Dualist frame with some freshly added details.
    $120.00
  31. Shen Drones Hydrophobe 5" Cine Quad Kit - DJI + Hero 8

    Shen Drones Hydrophobe 5" Cine Quad Kit - DJI + Hero 8

    The Hydrophobe is a 255mm water-resistant 5" cine quad with a 2mm aluminum mid plate that doubles as a heat sink for your ESC and VTX. It has a 3mm bottom carbon plate, 6mm arms, and 1.5 mm top plate. A TPU skirt keeps rain, snow, and dirt out, augment it with sealant to make it as waterproof as possible.
    $95.00
     Add to Cart
    Back Ordered
  32. Shen Drones Hydrophobe 5" Cine Quad - Carbon and Hardware Only

    Shen Drones Hydrophobe 5" Cine Quad - Carbon and Hardware Only

    The Hydrophobe is a 255mm water-resistant 5" cine quad with a 2mm aluminum mid plate that doubles as a heat sink for your ESC and VTX. This is universal to fit either Analog or DJI. It has a 3mm bottom carbon plate, 6mm arms, and 1.5 mm top plate. A TPU skirt will keep rain, snow, and dirt out, augment it with sealant to make it as waterproof as possible.
    $75.00
     Add to Cart
    Back Ordered
  33. RunCam Racer 5 1000VTL Micro FPV Camera w/ Gyro

    RunCam Racer 5 1000VTL Micro FPV Camera w/ Gyro

    The RunCam Racer 5 is a 1000TVL FPV Camera that brings you a high-definition analog FPV image. It is also the first gyro-equipped FPV camera available! Comes with a choice of 1.8 or 2.1mm lens.
    $35.99
  34. NewBeeDrone AcroBee BeeBrain Pro RTF Bundle Kit

    NewBeeDrone AcroBee BeeBrain Pro RTF Bundle Kit

    A perfect place to start if you don't want to build or tune your own quad! This RTF (Ready to Fly) kit features the AcroBee Pro as well as the super-durable cockroach frame. This kit comes pre-assembled and configured in Betaflight - bound to the radio. Simply turn on your radio, plug a battery into your quad, turn on your goggles... and fly! No building or tuning required, just turn on and fly! Now featuring a detachable screen for portability.
    $159.99
  35. iFlight TP X5 5" HD FPV Toothpick Racing Drone w/ Caddx Nebula Nano Digital HD System

    iFlight TP X5 5" HD FPV Toothpick Racing Drone w/ Caddx Nebula Nano Digital HD System

    Introducing iFlight's very first 5" toothpick-style drone, the TP X5 5" HD. It is equipped with the Beast F7 45A AIO flight controller, Caddx Nebula Nano2005 2550KV/1900KV motors, and Nazgul 5030 propellers!

    $329.99
  36. iFlight Chimera5 5" LR 4S Analog Quadcopter

    iFlight Chimera5 5" LR 4S Analog Quadcopter

    Introducing iFlight's first ultra-light Long Range 5" Chimera5 5" Analog BNF. The Chimera5 is equipped with iFlight's newest SucceX-E mini F7 hardware on board coupled with the XING 2005 motors, GPS, CaddX Ratel V2, and more! 

    $249.99
  37. RadioMaster TX16S Leather Side Grip (2pcs)

    RadioMaster TX16S Leather Side Grip (2pcs)

    Add a touch of class to your RadioMaster TX16S with these genuine leather side grips. These grips are comfortable and look great!

    $14.99
  38. RadioMaster M4 Alloy Stick Ends - (Red/Black)

    RadioMaster M4 Alloy Stick Ends - (Red/Black)

    Keep your thumbs/fingers from sliding with these durable stick ends from RadioMaster. These stick ends are made to fit radio gimbals with M4 threaded shafts. Different colors to choose from! (Black, Red)
    $9.99
  39. iFlight Chimera5 5" LR 4S HD Quadcopter w/ Caddx Nebula Pro Digital HD System

    iFlight Chimera5 5" LR 4S HD Quadcopter w/ Caddx Nebula Pro Digital HD System

    Introducing iFlight's first ultra-light Long Range 5" Chimera5 5" BNF.  Equipped with the Beast F7 AIO on board coupled with the XING 2005 motors, GPS, CaddX Nebula Pro, and more!

    $399.99
  40. Radiomaster TX16S Face Plate Set - (Gold/Carbon Fiber)

    Radiomaster TX16S Face Plate Set - (Gold/Carbon Fiber)

    This interchangeable faceplate set is a great upgrade for the Radiomaster TX16S Radio Transmitter. This set comes in three pieces. Fly in style with these colorful protective plates!

    $14.99
  41. RadioMaster TX16S CNC Upgrade Parts Set
  42. RadioMaster TX16S CNC Aluminum Folding Handle

    RadioMaster TX16S CNC Aluminum Folding Handle

    A replacement or spare CNC aluminum folding handle for the RadioMaster TX16S Radio Transmitter.

    $12.99
  43. Insta360 GO - 180° 1080P 20g Action Camera - Creator Bundle

    Insta360 GO - 180° 1080P 20g Action Camera - Creator Bundle

    A thumb-size sidekick that’s ready to go anywhere, Insta360 GO is one of the world’s smallest stabilized cameras. GO shoots 30 to 60-second clips at the press of a button. Anytime. Anywhere. Then it uses AI to help you find and edit your best shots. Condense your next trip into an extra-strength shot of awesomeness. This Creator Bundle comes with extra accessories, such as ring grip, mount adapter, carry case, sticky base, and type C adapter.
    $229.99
  44. ZTAG Drone Laser Tag Board (1pc)

    ZTAG Drone Laser Tag Board (1pc)

    The ZTAG system is a Drone Laser Tag System designed to work with any HD digital drone! Are you ready to be a real fighter pilot? ZTAG simply provides a circuit board with mounting holes and you can decide the best way to mount this in front of your HD camera. There are STL files for common frames that have 18-33mm spacing between its bottom camera standoff screws. The board will require 5-28V input voltages (handles 2S-6S or 5V directly from your flight controller).
    $49.99
  45. TrueRC X-AIR MK II 5.8GHz Antenna for DJI FPV (LHCP)

    TrueRC X-AIR MK II 5.8GHz Antenna for DJI FPV (LHCP)

    The TrueRC X-AIR MK II 5.8GHz Antenna for DJI FPV is a redesign of the previous predecessor with the same great performance, but easier to mount due to an uptilt angle.
    $59.99
  46. TrueRC X²-AIR MK II 5.8GHz SMA Antenna (RHCP)

    TrueRC X²-AIR MK II 5.8GHz SMA Antenna (RHCP)

    Following on the latest improvement of the X-AIR 5.8 MK II, TrueRX has shrunk down X²-AIR to bring you high gain and wide horizontal beam in a new compact and light package.
    $59.99
     Add to Cart
    Back Ordered
  47. ZOHD Talon 250G 620mm Wingspan Mini V-Tail EPP FPV RC Airplane (FPV)

    ZOHD Talon 250G 620mm Wingspan Mini V-Tail EPP FPV RC Airplane (FPV)

    The Talon 250G FPV Combo. Capable of achieving flying weights below 250G with full FPV gear (VC400 and Kopilot Lite or similar), the Talon 250G packs tons of fun in a very small footprint.
    $149.99
  48. ZOHD Talon 250G 620mm Wingspan Mini V-Tail EPP FPV RC Airplane (PNP)

    ZOHD Talon 250G 620mm Wingspan Mini V-Tail EPP FPV RC Airplane (PNP)

    The Talon 250G. Capable of achieving flying weights below 250G with full FPV gear (VC400 and Kopilot Lite or similar), the Talon 250G packs tons of fun in a very small footprint.
    $99.99
  49. RadioMaster TX16S Multi-Protocol RF 2.4GHz 16CH Radio Transmitter (Hall Gimbal) New Color Selection

    RadioMaster TX16S Multi-Protocol RF 2.4GHz 16CH Radio Transmitter (Hall Gimbal) New Color Selection

    RadioMaster set out to create the very best radio in its class without compromises with the TX16S. The TX16S has the best of everything they could fit into the radio, right from the very start. Super smooth precision Hall sensor gimbals with CNC aluminum facias, built-in USB-C charging port, class-leading ergonomics, standardized internal Multi-Module, improved key layout and menu navigation, external SD port, external UART expansion ports, improved sliders, and much more! Ships ready for Mode 2! The RadioMaster TX16S OpenTX Multi-Protocol 16ch Transmitter is available in stylish colors... Carbon Fiber, Silver, and Rose Gold!
    $219.99
  50. RadioMaster TX16S MAX Edition Multi-Protocol RF 2.4GHz 16CH Radio Transmitter (Hall Gimbal)

    RadioMaster TX16S MAX Edition Multi-Protocol RF 2.4GHz 16CH Radio Transmitter (Hall Gimbal)

    RadioMaster set out to create the very best radio in its class without compromises with the TX16S MAX. The TX16S MAX has the best of everything you could ever fit into radio right from the very start.
    $299.99

Set Ascending Direction

1-50 of 462

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5