Multi-Purpose FPV Quadcopter Kit
This bundle kit is setup so that you’ll be able to get into FPV without needing all the knowledge of knowing which parts and components are compatible with each other. This bundle kit includes everything you need so that you can get flying. The best thing about it is that you can follow the Build-Along video from FPV Academy to build this exact quadcopter. No previous building experience required! Links to individual products included in this kit can be found below.
Build Along Video:
If you’re looking for a really high-performance FPV Quad then look no further. This quadcopter packs a serious punch! The components are on par with what most Professional FPV Pilots are flying. If you are new to FPV, this quad will be perfect for a beginner pilot since it will take a beating against whatever you throw it at. At the same time, it’ll have all the performance you need when progressing as a pilot. If you are on a tighter budget, we would recommend that you invest in a premium quadcopter with high-quality components and then save on the add-ons, such as the radio and goggles.
Please read through the Purchasing Guidelines below to have a better understanding of which Addons you should consider purchasing.
The Multi-Purpose FPV Quadcopter Kit includes the following parts
Base Components - Multi Purpose FPV Quadcopter KitFrame: QAV-X CHARPU FPV Racing Quadcopter (4mm)
Electronic Speed Controllers (x4): Lumenier 35A BLHeli_S ESC OPTO (2-6s)
Motors (x4): Lumenier MX2206-9 2450KV Motor
Flight Controller: Lumenier LUX V2 Flight Controller
Power Distribution Board / On Screen display: Matek HUBOSD Eco X-Type W/XT60
Video Transmitter: Lumenier TX5GPro Mini 200mW 5.8GHz FPV Transmitter with Power Switch
FPV Camera: Lumenier CM-650 Mini, 2.1mm Lens, Top Connector - 650TVL Camera
Antennas: Lumenier AXII 5.8GHz Antenna (RHCP)
LiPo Battery Strap: Lumenier Small LipoStrap (3pcs)
Propellers (3 sets): Lumenier 5x5x3 - Butter Cutter Propeller (Set of 4 - Transparent Black)
RADIO (Select one)
Mid-range: FrSky Taranis Q X72.4GHz 16CH Transmitter (White)
Premium: FrSky Taranis X9D Plus 2.4GHz ACCST Radio (Mode 2)
Recommended: FrSky X4R-SB - 3/16 Channel Receiver w/ SBUS
GOGGLES (Select one)
Budget: FXT Marvel Vision 5.8 GHz FPV Goggles
Mid-range: HeadPlay HD FPV Headset w/ 40ch 5.8GHz Raceband Receiver
Premium: Fat Shark Dominator HD3 FPV Goggles
VIDEO RECEIVER (Required when purchasing Fat Shark Goggles)
Mid-range: Fat Shark 5.8GHZ 5G8RX 32ch Race Band Receiver Module for Dominators
Premium: Furious True-D Diversity Receiver Module 5.8GHz System
VIDEO RECEIVER ANTENNA (Required when purchasing Furious True D Video Receiver for Fat Shark Goggles)
Recommended: TrueRC 5.8GHz X-AIR(RHCP)
CHARGER (Select one)
Budget: EV-Peak C1 50W 6Amp NiMH / LiPO Battery Balance Charger
Mid-range: EV-Peak C4 80W 8Amp NiMH / LiPO Battery Balance Charger
Premium: EV-Peak CQ3 Multi Charger 4x 100W NiMH / LiPO with Built-in Balance
LiPo Tester: 1-8S Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
LiPo Bag: Lipo-Safe Bag
Recommended: Lowepro QuadGuard BP X2
Camera: GoPro HERO5 Session
Memory Card: SanDisk 64GB microSDXC Class 10 UHS-1 Memory Card with microSD Adapter (80MB/s)
Action Camera Mount: QAV-X GoPro SessionMount
If you currently don’t have any FPV related products, you would need the following items.
- Radio Receiver
- FPV Goggles
- Video receiver (only for Fat Shark Goggles)
- LiPo Bag
If you already have a few of the listed items, select the “None” option to skip it.
RADIOYou need a radio to be able to fly your quad. The Quadcopter does not include a Radio Receiver, so you would need to add a Radio Receiver that is compatible with your Radio to be able to fly the quad.
GOGGLESAll the listed goggles are great for flying FPV! Select the goggle that suits your budget. If you do decide to purchase the premium, Fat Shark goggles; you would have to add a Video Receiver to your order as it does not come built-in with one. The other goggles already have a video receiver included, so no need to add one to your order if you select a different option than the Fat Shark Goggles.
VIDEO RECEIVERThe Fat Shark Goggles DO NOT include a built-in receiver so you would have to include one as an addon if you select the Fat Shark Goggles. Both receivers are great but we would recommend the Diversity Receiver if your budget allows for it. The Diversity Receiver allows you to attach 2 antennas to your goggles, giving you a clearer picture in certain conditions. If you do select the Diversity Video Receiver, then you would need to purchase the extra “Patch” Antenna which allows for the performance gain.
CHARGERAny charger would be able to charge your batteries. The only difference would be the amount of input ports available, the Wattage that the charger is capable of and a few other bells and whistles such as touch screens and additional features (which aren’t always necessary unless you are interested in knowing a lot of additional information about your batteries such as Internal Resistance etc.) If you are going to be serious about flying, we would recommend the 4-input charger so that you can charge multiple batteries at a time.
BATTERIESThe batteries included in this kit is some of the highest performing batteries on the market. Usually, depending on how you fly, a 1300mah 4S battery would last you anywhere between 90 seconds to 6 minutes. That’s usually not a lot of time. We would recommend that you have a minimum of 4 batteries to fly as it would allow you to fly more and have an extended “FPV grin” on your face! You can never have too many batteries.
BATTERY ACCESSORIESLiPo Bag... We’ll say it again... LiPo Bag… This is one of the most important components in your FPV setup. LiPo fires are a real danger. Whilst they don’t happen often, you always want to be safe! We recommend that you store no more than 4 batteries per LiPo bag. ALWAYS charge and store your LiPo batteries inside a LiPo Bag. We’d also recommend adding a LiPo Tester to your cart; it allows you to check the Voltage Levels of your battery so that if you’re unsure whether it’s charged or not, you can plug it in and get an answer.
FPV BACKPACKSNow that you have all this gear, how will you be transporting it to the field and back? Any normal backpack will suffice, however, there are bags specifically made for FPV Gear. A dedicated FPV Gear bag will also protect all of your gear during transport.
ACTION CAMERASOnce you’re up and flying, you’ll want to share your FPV flights with family, friends and the FPV Community. The best way to do this is with an Action Camera. We would recommend the GoPro Hero 5 Session. Remember to include a Memory Card if you don’t have one lying around. We’d also recommend the 3D Printed GoPro Hero 5 Session mount made specifically for this quadcopter.
SWAGGoing to an FPV meet-up? Want to look great when flying FPV? Wearing the Lumenier and GetFPV branded Apparel makes it official; you are now an FPV enthusiast.
Flying FPV can become addictive.
- Additional Information
SKU 6845 UPC (GTIN) No
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.