Out of Stock

Only left for same day shipping. Order now!
The FCHUB-6S PDB was designed to connect directly to the Matek F405-OSD flight controller, it can also be used with other flight controllers using the solder pads to connect to the flight controller.

About this product

This PDB distributes power from a 3~6S LiPo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

It also has built-in 184A current Sensor, and offers a FFC socket to conveniently connect the Matek F405-OSD Flight Controller.


  • Total 4 pairs ESC solder tabs are fit for X type frame
  • Max.27V input w/ TVS protection
  • Built-in current sensor 184A
  • PDB: 4*30A (4*46A, 5 seconds), 4layers*2oz copper PCB
  • BEC 5V/1.5A(2A Max) w/ 100uF panasonic POSCAP filter
  • BEC 10V/1.5A(2A Max.) w/ 47uF TDK MLCC filter
  • 5V & 10V Output LED indicators & Short circuit tolerant


Current Module

  • Max.range 184A
  • 3.3V ADC
  • Scale the output voltage to milliamps(1/10th mV/A): 179

BEC 5V output:

  • Designed for RC Receivers, Flight controllers, OSD, and Servos.
  • DC/DC synchronous buck regulator.
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 1.5 Amps (Max.2.0A 10s/minute)
  • Short-circuit tolerant (2 seconds/minute)

BEC 10V output:

  • Designed for Video TX or FPV camera.
  • Voltage: 10.0 +/- 0.2VDC
  • Continuous current: 1.5 Amps (Max.2.0A 10s/minute)
  • Short-circuit tolerant (2 seconds/minute)
  • 10V can be used to power cameras labeled as 12V
  • The 3S LiPo input voltage should be 11V plus


  • Mounting: 30.5 x 30.5mm, Φ3mm
  • Dimensions: 36 x 46 x 4 mm
  • Weight: 8.5g


  • Download the manual here.

More Information

SKU 7382
UPC (GTIN) 704817761122
Manufacturer Matek Systems
NDAA Compliant No
Item Returns This item can be returned

Also Purchased