MATEKSYS F405-OSD - Betaflight FC

MATEKSYS F405-OSD - Betaflight FC

Out of Stock

Only left for same day shipping. Order now!
Earn
MATEKSYS F405-OSD - Betaflight FC
The Matek F405-OSD is a betaflight compatible flight controller with a built in OSD. Designed to connect directly to the FCHUB-6S.

About this product

The Matek F405-OSD is a betaflight compatible flight controller with a built in OSD. Designed to connect directly to the FCHUB-6S.

Specifications

  • MCU: 168MHz STM32F405
  • IMU: 32K ICM20602 accelerometer/gyro (SPI)
  • Support 32K Gyro update & 16K PID Loop
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • Support SoftSerial on S5 & S6
  • Battery Voltage Sensor: 1:10
  • Currsnt Sensor: No (FCHUB-6S option)
  • BEC 5V & 10V: No (FCHUB-6S option)
  • LDO 3.3V: Max.300mA for Spektrum RX
  • Spektrum BIND_PIN: RX4
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Betaflight TargetMatekF405 Target
  • 2x LEDs for FC STATUS (Blue, Red)
  • 6x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
  • 36x36mm PCB with 30.5mm mounting holes

Includes

  • F405-OSD Flight Controller
  • w/ 1x 0.5mm*16Pin 5cm Flexible Flat Cable
  • w/ 4pcs M3 Anti-vibration Standoffs

Downloads

Downloads and setup information can be found here

 

More Information

SKU 7380
Manufacturer MatekSys
Mounting Pattern N/A
NDAA Compliant No
Item Returns This item can be returned

Also Purchased