Welcome to GetFPV My Account My Wishlist Log In

iFlight Nazgul5 HD 5" 6S FPV Freestyle RTF w/Caddx Nebula Nano V2

More Views

iFlight Nazgul5 HD 5" 6S FPV Freestyle RTF w/Caddx Nebula Nano V2

The Nazgul5 HD is loaded with lots of power; it comes with the XING-E 2207 6S 1800KV motors, SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have!

Choose option below...

* Required Fields


This iFlight Nazgul5 HD is a 5" RTF/ BNF (Bind-and-Fly) quadcopter that comes with the Caddx Nebula Nano V2 Camera, and Nazgul 5" 3-Blade propellers. This quad is the updated version of the XL5 V5 FPV frames. The Nazgul5 HD has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! Loaded with lots of power; it comes with the XING-E 2207 6S 1800KV motors, SucceX-E F7 Flight Controller, and the SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which make this quad a must-have!

Note: The color of propellers and LiPo straps may vary, GoPro and GoPro Case are NOT included.

VIDEO: Nazgul 5 HD Best Drone Of 2020


  • XING-E 2207 motors and NAZGUL 5140 props
  • 5" version also fits 5.1" style propellers
  • Fits both 30.5x30.5 and 20x20 stacks
  • 5mm arm design for more durability
  • Caddx Nebula Nano V2 camera
  • Popular True-X configuration
  • LED illuminated Logo
  • TPU crash-guards
  • Easy-Swap arms


This BNF comes pre-built and set up with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks to enhance the flight experience.

Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on iFlight's Google Drive.


  • Receiver: PNP or TBS Crossfire Nano Rx
  • XING-E 2207 6S 1800KV FPV Motors
  • FC pattern: 30.5x30.5/20x20 mm
  • Weight: 393.4g (without battery)
  • Propeller size: 5 inch /5.1 inch
  • SucceX-E F7+ 45A flight stack
  • Wheelbase: 240mmx240mm
  • FPV cam spacing: 19mm
  • Body size: 170x170mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
  • STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Supports 2-6S Lipo input
  • Target: G-H-30 BLS 16.7
  • Dimension: 40*43mm
  • Current sensor: YES
  • Weight: 14.4g
  • BEC: NO


  • Dimension: 14*14*21mm(can be extended into 19*19mm)
  • Image sensor: 1/3 inch CMOS sensor
  • TV system: NTSC&PAL(switchable)
  • Work Temperature: -20℃~+60℃
  • FPV/Recording FOV: 150°
  • Resolution: 720p/60fps
  • FPV Latency: 32ms
  • Lens: 2.1mm
  • Weight: 4.5g

SucceX-E F7 FC

  • Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
  • UART1 for VTX HD (for 4-6S Vista, for 4S DJI Air Unit) /AnalogTelemetry
  • Smartaudio & IRC Tramp VTX protocol supported
  • Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
  • Uart: 4 (UART1, UART2, UART4, UART5)
  • Firmware: IFLIGHT_SUCCEX_E_F7
  • MCU: STM32F22RET6 216MHz

  • OSD: iFlight OSD (AT7456E)
  • UART5 for ESC Telemetry
  • 4×Dshot/PWM outputs
  • WS2812 led Strip: Yes
  • UART2 for Receiver
  • BlackBox: 16MB
  • UART4 for Free
  • BEC: 5V 2.5A
  • Weight: 6.9g
  • Gyro: 20689
  • Bepper: Yes

Recommended Parts (Not Included)


  • 1x iFlight Nazgul5 HD 5" 6S FPV Freestyle RTF w/Caddx Nebula Nano V2 (PNP or TBS Crossfire options)
  • 2x iFlight Nazgul FPV 5140 3-Blade Propeller (Set of 4)
  • 1x Albatross RHCP SMA 5.8g antenna
  • 1x 25cm LiPo Battery Strap
  • 1x 20cm LiPo Battery Strap
  • 1x GoPro Bolt + Allen Key
  • 1x USB-C Charging Cord
  • 1x USB Charging Cord
  • 1x Hardware Kit
  • 2x Battery Pads
  • 4x Prop Nuts
Additional Information
SKU 16825
Manufacturer iFlight
Static Block iflight_return_policy

iFlight Support