The iFlight CineBee 75HD is the latest creation from iFlight. This power whoop swings 1.6" props with 2-3s power giving you HD footage from a micro quad capable of some quick and nimble maneuvering.
It provides 1080p 60fps HD recording via the Caddx Turtle V2 Camera. The Cinebee was built to record JELLO-FREE footage flying through the smallest gaps and tightest angles. If slow cruising or fast racing, the cam angle adjusts from 0-55 degrees.
The intent of the Cinebee is clear. Create a lightweight, durable but jello-free whoop that can shoot high-quality HD videos. iFlight decided to use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn't oscillate, with still crash resistant abilities and integrated prop guards giving the whole frame strength. The stack is soft-mounted, the cam is soft-mounted, the motors run smooth - keeping your props in condition, plus you won't have to worry about jello!
- Ultra-light but high performance
- JELLO-FREE durable carbon/plastic construction
- No props or prop guards in view
- Upgradeable, versatile, futureproof
- Total Dimensions: 110x93x30mm
- Frame Wheelbase: 75mm
- Build Weight: 66.2g
- SucceX Micro 16x16 Tower 2-4S
- iFlight 1103 motors 10000kv (1.5mm shaft)
- Caddx Turtle V2 HD FPV cam
- Gemfan 1635 40mm 3/4 blade OR HQ 1.6x1.6x4
- iFlight Prop Guards 40mm
- Frsky - XM+
- No Receiver - PNP
SucceX Micro F4 Flight Tower System 16x16mm
SucceX F4 Flight Controller
- Input voltage 2-4S LIPO
- Gyro: MPU6000
- 2x UART ports
- 4x motor outputs
- OSD inbuilt
- No Blackbox FLASH
- BEC 5V 2A cont.
- Size: 21mm*21mm
- Mounting holes: 16*16
- Weight: 2.5g
- BF target: MATEKF411
SucceX Mirco 12A Brushless ESC
- Firmware: BlheliS
- Input voltage : 2-4S LIPO
- Continuous current: 12A
- Battery Connector: XT-30
- MCU: BB21F16G
- BEC : None
- ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
- Size: 23mm*21mm
- Mounting hole 16*16mm
- Weight: 2.7g
SucceX Micro VTX
- Power: PIT/25/100/200mW
- Antenna interface: IPEX (UFL)
- Channels: US Legal
- Telemetry: IRC Tramp
- Size: 17mm*27mm
- Mounting holes: 16*16mm
- Weight: 1.6g
SD card insert and ejection
-The HD cam PCB is conveniently placed under the frame, protected by a cover.
-To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard.
VTX control implementation
-VTX can be conveniently set up in your OSD.
-Gemfan for general use, durable prop, crash resistant!
-HQ for video recording, JELLO-FREE, better throttle management, NOT as crash resistant!
- 1x CineBee 75HD 2-3s Brushless Whoop
- 1 set Gemfan 1635 props (1.5mm shaft)
- 1 set HQ 1.6x1.6x4 props (1.5mm shaft)
- 1 set Frame sticker decals
Note: No battery included
- Additional Information
SKU 10366 Manufacturer iFlight UPC (GTIN) No