The Happymodel Pancake AIO is an amazing combination of a flight controller, receiver, and video transmitter! Mounting options include both 30.5mm and 20mm spaced holes.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Pancake AIO FC - Happymodel

• 30.5 x 30.5mm or 20x20mm Mounting Pattern
• ONBOARD SPI EXPRESSLRS 2.4GHZ
• ONBOARD 5.8GHZ OPENVTX
• CRAZYBEEF4SX1280 FC
• 2-S6S Lipo Input
• Betaflight OSD
• MPU 6000 SPI
• 48 Channels

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

FLIGHT CONTROLLER

• Firmware Target: CRAZYBEEF4SX1280
• MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU6000 (SPI connection)
• Mount hole type: 20×20mm or 30.5×30.5mm
• Power supply: 2-6S battery input
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G OpenVTX 0mw~400mw
• Built-in ExpressLRS 2.4G ELRS V2.0 firmware compatible
• Weight: 5.18 g

ONBOARD SPI EXPRESSLRS 2.4GHZ 

•  Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz
• Support ExpressLRS v2.0 or latest*
• RF Frequency: 2.4GHz
• Antenna: SMD ceramic antenna
• Telemetry output Power: <12dBm
• Receiver protocol: SPI ExpressLRS
• Compatible with ExpressLRS V2.0 TX Module

ONBOARD 5.8GHZ OPENVTX

• Firmware: OpenVTX
• Smartaudio v2.1
• PIT Mode support
• RCE Mode support
• Channels: 48ch
• Transmitting Power: 0/RCE/25mw/100mw/400mw
• Power supply: DC 5V
• Current (5v): <650ma (400mw)
• Antenna connector: U.FL

IMPORTANT NOTES

• ExpressLRS firmware cannot be flashed separately.

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Pancake AIO Flight Controller
• 1x XT60 Pigtail
• 1x Mounting Hardware
• 1x U.fl Antenna
• 1x Wiring Harness

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS