+1 (941) 444-0021CONTACT US

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

2.4GHz A/V Receiver


ImmersionRC Style Cable for Lumenier GoPro Connector

AltitudeRC Nano 25mw 5.8GHz FPV Video Transmitter

4.6 4 5 1

Quick Overview

A new micro 5.8ghz module,100% ready to use with Fatsharks.
In Stock

Regular Price: $49.99

Special Price $39.99


A new super tiny nano 5.8ghz module,100% ready to use with Fatsharks. 

Dimensions (w/o antenna and cables) :
Width : 20mm
Length : 23.6mm
Height : 8.2mm
Weight : 3 gr

Input voltage range : 3.4v - 12.6v (1s - 3s lipo)
Camera output voltage : 3.6v
Output power : 13-14dBm (25mW)

Power connector : JST female
Camera connector : JST ZH on the transmitter, loose end wire to camera.

Frequencies :

Switch # 1 2 3 4

Position (1=on, 0=off)

  • 1 1 1 - 5740MHz (CH1)
  • 1 1 0 - 5760MHz (CH2)
  • 1 0 1 - 5780MHz (CH3)
  • 1 0 0 - 5800MHz (CH4)
  • 0 1 1 - 5820MHz (CH5)
  • 0 1 0 - 5840MHz (CH6)
  • 0 0 1 - 5860MHz (CH7)
  • 0 0 0 - 5860MHz (CH7)


  • Power by 1s to 3s 
  • Power the 3.6v for camera too
  • Real Airwave module, plug and play with Fatshark
  • Easy setup

Additional Information

SKU 1784
Manufacturer AltitudeRC
Frequencies 5.8GHz
  1. Awesome! review by Eric on 9/23/2015

    I love this on my sport cub s!

  2. Nice little package review by Steve on 10/16/2014

    After reading a few reviews at RCG I wantee to add that I setup this tx on a Walkera ladybird v2, what an amazing difference! Rcg states the tx actually transmits at closer to 40mw, which is more than enough for '150-'250 flights!

  3. fantastic value and great performance! review by Scott G on 9/28/2014

    with this little setup, you are ready to add FPV to virtually any micro quadcopter or Heli with no issues. This little video transmitter works just like the bigger Immersion RC version where it supplies 5v for your camera, has built in filter to eliminate any interferences and includes all cables you would ever need to hook up for power and video. I coupled this with a nano styled micro camera which you can get here as well. One of the best values for the hobby in order to get into FPV with a great transmitter that is 100% compatible with Airwave (Fatshark ) receivers all under 3 grams!

  4. The quality you get depends on the antenna tuning review by Austin42 on 8/13/2014

    I bought this to put on my 200qx. It worked ok with the stock antenna but tuning the antenna is key. I got an adapter for it (from wifi expert) so I could run an immersionrc rhcp. On it and the range went up quite a bit as did the video quality. With tis set up on my 200qx with the stock battery and original firmware I America getting good flight time I haven't pushed it out yet but when I land at 3:30 I still have 54% left In the pack. And can go 250ft with good video. With the stock antenna and an external 2c 180mah lipo I land with 34% after 5:30 flight video is good to 100-140ft. An other note Hugo (hugeone on rcg) From TrueRC Is making a cloverleaf that will connect straight to this tx. I have one ordered from him but I don't have it yet.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

FPV Regulatory Notice

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Also Purchased