Happymodel X12 AIO 5-in-1 Board - F4 FC + 12A ESC

Happymodel X12 AIO 5-in-1 Board - F4 FC + 12A ESC

In Stock

Only left for same day shipping. Order now!

Options

Happymodel X12 AIO 5-in-1 Board - F4 FC + 12A ESC
The Happymodel X12 is a 5-in-1 AIO board featuring an F4 Flight Controller, onbard 12A 4-in-1 ESC, 5.8GHz OpenVTX, and three different receiver options: PNP, FrSky, or ELRS. This AIO is great for brushless whoops with its great RX an VTX range!

About this product

The Happymodel X12 is a 5-in-1 AIO board featuring an F4 Flight Controller, onbard 12A 4-in-1 ESC, 5.8GHz OpenVTX, and three different receiver options: PNP, FrSky, or ELRS. This AIO is great for brushless whoops with its great RX an VTX range!

Features

  • PNP, FrSky, or ELRS Receiver Options
  • Great for 1-2S Brushless Whoops
  • Onbard 12A 4-in-1 ESC
  • F4 Flight Controller
  • 5.8GHz OpenVTX
  • 5-in1 AIO Board

Specifications

  • Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
  • ELRS Version: CRAZYBEEF4SX1280
  • LITE Version:CRAZYBEEF4SX1280
  • FRSKY Version:CRAZYBEEF4FR
  • PNP Version:CRAZYBEEF4DX
  • Support 1-2S Lipo/LIHV battery
  • Brand Name: Happymodel
  • Betaflight firmware target:
  • Size: 30x30x8mm
  • VTX antenna: U.FL
  • Weight: 5.1g

FLIGHT CONTROLLER

  • Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470
  • Reciever Target:
    • X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
    • X12 Frsky V1.0 flight controller built-in FRSKY 2.4G receiver Target: CRAZYBEEF4FR
    • X12 PNP V1.0 flight controller without onboard receiver Target CRAZYBEEF4DX
    • X12 LITE V1.0 flight controller built-in ELRS 2.4G receiver Target:CRAZYBEEF4SX1280
  • Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • Built-in ExpressLRS 2.4G,Frsky D8/D16
  • Built-in 5.8G OpenVTX 0mw~400mw
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Built-in Betaflight OSD(SPI Control)
  • Mount hole size: 25.5mm*25.5mm

ONBOARD 4-IN-1 ESC

  • When use Blujay firmware with 48khz, should set startup power to 1100/1200
  • Current: 12A continuous peak 15A (3 seconds)
  • Factory firmware: Z_H_30_REV16_7.HEX
  • Support BLHeliSuite programmable
  • Power supply: 1-2S LiPo/LiPo HV
  • Default protocol: DSHOT300
  • Support Bluejay firmware

ONBOARD 5.8GHZ VTX

  • Transmitting Power: 0/RCE/25mw/100mw/400mw
  • Current (5v): <650ma (400mw)
  • Firmware version: OPENVTX
  • Antenna connector: U.FL
  • Power supply: DC 5V
  • RCE Mode support
  • PIT Mode support
  • SmartAudio v2.1
  • Channels:48ch

RECEIVER OPTIONS - PNP, ELRS, FRSKY

ONBOARD SPI ELRS 2.4GHz

    • Packet Rate option: 50Hz/150Hz/250Hz/500Hz
    • ExpressLRS Firmware version: V2.0
    • RF Frequency: 2.4GHz
    • Antenna : SMD antenna
    • Telemetry output Power: <12dBm
    • Receiver protocol: SPI ExpressLRS
    • Compatible with ExpressLRS V2.0 TX Module
    • Couldn’t flash separately ExpressLRS firmware

ONBOARD FRSKY SPI D8/D16

    • SPI BUS receiver
    • CC2500 RF
    • Compatible Non EU transmitter D8 model Channels: 8ch
    • No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
    • Support Frsky D8/ D16 , Redpine , SFHSS

Includes

  • 1x Happymodel X12 AIO 5-in-1 Board - F4 FC + 12A ESC (Choose Receiver)
  • 1x Connecting Wires Set
  • 1x Hardware Set
  • 1x Antenna

More Information

SKU 18964
Manufacturer Happymodel
Item Returns This item can be returned

Also Purchased

BETAFPV Beta75X V2 Brushless Whoop Frame
As low as $4.99
Select Options
BETAFPV SMO 4K Camera
Out of Stock
HQProp 31MMX4 Micro Whoop Propeller (1mm Shaft - Set of 4)
As low as $2.25
Select Options
Happymodel Moblite7 650mAh 1S Lipo Battery
$4.99
Back Ordered