The improved F_Series 120F3[X] ESCs. Building upon our trusted ARM architecture, the V2 release features introduce a number of highly requested features into the product range, including configuration options, Bi-Directional DShot, and UART overvoltage protection. The 120F3[X]v2 ESCs are drop-in replaceable to 120F3[X] units. As before, existing features include PWM-frequency dithering and Active Phase-Current Demagnetisation, allowing for smooth control with virtually all powertrain combinations with peak power outputs of up to 9 kW. 

V2 UPGRADES

• Configuration of drive parameters, signal types and fault handling
• High-speed telemetry rates when operating DShot and ProShot
• Dynamic signal quality checks across supported input protocols
• Additional Telemetry types: PWM Telemetry and RPM Output
• Reversible operation support (full forwards to full reverse)
• Passthrough firmware updating and configuration
• Hardware protection for UART programming pins
• Bi-Directional DShot for RPM Filtering support
• On board bootloader

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

• Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability
• Bare-PCB design to allow maximum integration within the end setup
• Virtually no setup time, with a simple motor reverse solder tab
• Digital commands over ProShot (including anti-turtle mode)
• Automatic current limiting and over-temperature protection
• DShot150 to DShot600 capable (0.15-0.6Mbs/s)
• 8-Layer PCB to ensure minimal track resistance
• Up to 750,000 eRPM (protocol dependant)
• Proprietary firmware designed in Australia
• Up to 120 A continuous* output current
• ProShot1000 capable (1Mbs/s)
• Auto-detect ProShot or DShot
• Digital commands over DShot
• Auto PWM output frequency
• Up to 12S (50.4 V) capable
• Plug and play firmware
• True 10-bit resolution
• Auto timing advance
• 200 A Burst current
• Telemetry output
• Motor agnostic
• LED indication

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Documentation: docs.powerdrives.net
• CAD Model: 120F3 CAD Model
• Dimensions: 70x30x20mm
• Weight: 0.02kg

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x APD F-Series 120F3[X] V2 120A 12S 50V ESC

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS