The XILO Phreak FPV Racing Quadcopter is a stretched X, ultra-durable, easy to work on, carbon fiber airframe. The Phreak was created to offer FPV racing pilots a solid racing frame at an affordable price. We know that racing frames take a beating, so you want a quad that is easy to repair and work on, and won't cost an arm and a leg. If you're looking for a quality frame at a great price, then this XILO Phreak is the quad for you!

The airframe features removable 4mm carbon fiber arms and 2mm thick top and bottom plates. The arms are sandwiched between the bottom plate and 2mm battery plate giving you an incredible 8mm thick of carbon fiber at the center of the body. Each arm is secured in place with just 2 screws and steel press-fit nuts on the main plate. This allows you to swap an arm by simply taking out 1 screw and loosening the other, pulling the arm out of the slot. It is very fast and easy to work on!

Each 4mm arm and plates are CNC milled out of a solid sheet of high quality XILO carbon fiber. The outer weave of the carbon fiber runs 100% down each arm of the XILO Phreak (0/90 weave), maximizing the strength of the carbon and arms. The center layers are offset at 45 degrees providing even and balanced strength throughout the entire plate.

This XILO frame kit includes a set of molded rubber camera brackets for easy and secure mounting of your micro-sized FPV camera. No need to 3D print a set, these mounts are durable, semi-rigid, and work perfectly to hold your camera at any desired angle. The brackets can easily be moved up or down on the standoffs to hold the camera at the perfect height for your build.

The Phreak kit comes with high-quality anodized aluminum spacers. All screws are premium, black oxide steel. The spacers have a textured grip surface treatment, which facilitates holding of the spacers during assembly and servicing of the airframe. The spacers are 28mm tall giving you room for all the electronics to be protected inside. A silicone non-slip battery pad is included which makes an excellent platform for your LiPo battery and helps reduce the chances of a battery ejection during a crash.

Features

• Full 3K Carbon Fiber airframe with removable 4mm arms (3", 4", 5", 6" arm options).
• Slotted arms allow for easy arm swaps by removing only 1 screw
• Molded rubber FPV camera mounting brackets (designed for micro sized cameras)
• Built in carbon fiber camera bumper guard
• Popular Stretched-X configuration
• Black Oxide steel screws
• Easy grip blue anodized spacers
• Motor guards on the end of the arms to protect the motor during a crash
• Fits both 30.5x and 20x stacks
• Silicone non-slip battery pad
• 5" version fits popular 5.1" style propellers

Weight

• Airframe with Hardware:
• 3" version - 75g
• 4" version - 82g
• 5" version - 86g
• 6" version - 92g

Includes

• 1x XILO Phreak FPV Racing Quadcopter Kit
• 4x 4mm carbon fiber arms
• 2mm carbon fiber top plate
• 2mm carbon fiber main plate (with press fit steel nuts)
• 2mm carbon fiber bottom plate
• 1x XILO Sticker Sheet
• 1x Set of black steel screws and aluminum hardware including knurled spacers, cable ties
• 1x No-slip silicone battery pad
• 4x Silicone vibration damping o-rings
• 1x XILO 240mm battery strap

Replacement Parts

Need replacement parts for your Phreak? Check out this page.

Videos