This latest HD RTF features the new DJI O3 Air Unit on the amazing ImpulseRC ApexDC FPV Frame - Light Weight Mr Steele Edition. ImpulseRC has worked with legendary FPV pilot Mr Steele throughout the development lifecycle to ensure the Apex is up to the high standards of the man himself. The ApexDC brings improvement to the classic 'deadcat" geometry for freestyle, videography, and mid-range exploration.

• Each Mr Steele HD 5″ 6S Quadcopter RTF is hand-built, tuned, and test-flown in the USA.
• Endorsed by Mr. Steele himself, preloaded with his tune and settings.

Mr. Steele is an FPV hobby enthusiast, who has been flying FPV drones since April 2014. As a result of his massive flying skills, knowledge in FPV and  "mustache" personality, he has been named one of the best in the game! Due to a high reach on social media and popularity, Mr Steele has become one of the world's first full-time professional FPV freestyle pilots. Nonetheless, Mr Steele has worked with ESPN, CNN, BMW, GoPro, RedBull, and other well-known companies!

Note: Some items in your bundle may not be in stock at the time of purchase. Be sure to check the shopping cart to see the stock status of each item. Your order will ship once all items are in stock. We suggest placing a separate order for back-ordered items so your in-stock order can ship right away.

VIDEO: Mr Steele ImpulseRC APEX DC Build Video 2022 Fettec/Crossfire/DJI

• Injection-molded Landing Skids on the end of the arms protect the motor during a crash
• RTF is fully built and test-flown by our technicians at our GetFPV Florida facility
• Pre-tuned with smooth freestyle settings directly from Mr. Steele
• Premium Ethix Mr Steele Stout V4 2306 1750KV Motors
• Full 3K Carbon Fiber airframe with silky clear coat
• Advanced FETtec KISS F7 Flight Controller
• Lightweight ApexDC Mr Steele Frame
• DJI O3 HD FPV System

DJI O3 AIR UNIT

The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!

DJI HD CAMERA ISOLATION

Like the Caddx Vista itself, certain DJI HD cameras can also ground the frame, with similar unfortunate consequences. Included with the ApexDC are newly redesigned HD camera plates and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.

UNIQUE ARM GEOMETRY

The typical 'dead cat' design moves the front arms outwards while moving the rear arms back and closer into the body. This has the benefit of clearing the camera view of props, however, there are major drawbacks for flight characteristics because the front and rear motors are no longer aligned.

The ApexDC is a variation on this classic 'dead cat' which keeps the front and rear motor aligned to maintain the much loved compressed-x geometry that ImpulseRC brought to the industry. This keeps the frame balanced and flight performance is no longer compromised. By modifying only the upper and lower main plates we retained full compatibility with regular Apex arms, using standard 5" arms at the front and standard 6" arms at the back.

There are no props in shots of DJI HD flight cameras and for slower cinematic flying it's now possible to run GoPro angles lower than ever before.

CUSTOM GOPRO MOUNTING

For quick angle changes, while filming, not many mounts can beat the standard GoPro tab and slot design. However, the stock GoPro bolt leaves a lot to be desired for FPV use. Included with the Mr Steele version of the ApexDC is not only a 3D printed mount but also a new custom-designed bolt, specifically for FPV use. Our new bolt is machined from aluminum for substantial weight savings and has an 8mm hex on the outside, along with an internal 2.5mm hex broach. Make quick changes to your GoPro angle using either the standard hex driver for M3 bolts or the prop tool for M5 nuts, which you already have with you in your flight bag.

QUALITY ACCESSORIES

This RTF includes quality accessories such as a custom immortal-T antenna mount, injection-molded brown skids, rubber and velcro battery pads, and Mylar and POM Vista isolation parts.

• Frame: ImpulseRC ApexDC FPV Frame - Light Weight Mr Steele Edition
• Propellers: HQProp Ethix P4 Candy Cane 5.1x4x3 Propeller
• Motors: Ethix Mr Steele Stout V4 2306 1750kv Motor
• Weight: AUW of 395g (excluding battery)
• VTX/Camera: DJI O3 HD FPV System
• FC: FETtec KISS F7 Flight Controller
• ESC: FETtec 45A 3-6S 4-in-1 ESC
• Receiver: DJI BNF

IMPORTANT NOTES

• If you are buying this bundle from outside the United States and choose the Lipo Battery as your gift. You MUST open an account with our new shipping partner MyUS.com This is to enable your order to be shipped by air overseas, otherwise, you will not be able to check out with the battery selected.

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Mr Steele ApexDC 5" HD Quadcopter RTF w/ DJI O3 HD FPV System - 6S - DJI BNF

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS