Cobra CM-2208 2000kv Motor

Cobra CM-2208 2000kv Motor

Out of Stock

Only left for same day shipping. Order now!
Cobra CM-2208 2000kv Motor
A powerful Cobra CM-2208 2000kv multirotor motor.

About this product

Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

The Cobra CM-2208 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2208 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The CM-2208 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.

Included with every Cobra CM-2208 Series Motor is a complete accessory package which contains the following items:

  • Four M3x5mm Motor Mount Screws
  • Four M3 Flat Washers
  • Machined Aluminum Prop Washer
  • Locking Prop Nut with Nylon Insert

Click here for the Cobra CM-2208/20 Propeller Data Chart

Cobra CM-2208/20 Motor Specifications
 Stator Diameter  22.0 mm (0.866 in)
 Stator Thickness  8.0 mm (0.315 in)
 Number of Stator Slots  12
 Number of Magnet Poles  14
 Motor Wind  20 Turn Delta
 Motor Kv Value  2000 RPM per Volt
 No Load Current (Io)  0.77 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase  0.114 Ohms
 Motor Resistance (Rm) Phase to Phase  0.076 Ohms
 Maximum Continuous Current  20 Amps
 Max Continuous Power (2-cell Li-Po)  150 Watts
 Max Continuous Power (3-cell Li-Po)  220 Watts
 Motor Weight  44.2 grams (1.56 oz.)
 Outside Diameter  27.7 mm (1.091 in.)
 Motor Shaft Diameter  3.00 mm (0.118 in.)
 Prop Shaft Diameter  5.00 mm (0.197 in.)
 Motor Body Length  24.0 mm (0.945 in.)
 Overall Shaft Length  45.2 mm (1.780 in.)
 Motor Timing  5-10 degrees
 PWM Frequency  8 KHz

Motor Performance Graphs

The following downloadable PDF files show the performance data curves of the Cobra CM-2208/20 motor, over its entire throttle range, with a variety of propellers. These graphs can be downloaded and printed to use as a reference for calculating power requirements at specific thrust levels, and enable the user to calculate flight times, current draw and other motor parameters.

2-Cell Li-Po Power

3-Cell Li-Po Power

More Information

SKU 2767
Manufacturer Cobra
NDAA Compliant No
Popo Compatible No
Item Returns This item can be returned

Also Purchased