Welcome to GetFPV

QAV500 V2 FPV Quadcopter (RTF)

Be the first to review this product

Availability: In stock

From: $554.90

To: $1,598.02

Price as configured: $0.00

Quick Overview

A fully built, ready to fly QAV500 V2 by Lumenier. Made to order, please allow 5-10 days from time of purchase to complete.

QAV500 V2 FPV Quadcopter (RTF)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Lumenier 30 amp ESC w/ SimonK AutoShot Firmware   +$19.99
QAV500 V2 FPV Quadcopter Frame   +$114.99
QAV500 RTF Build, Test and Tune Fee   +$250.00

* Required Fields

Price as configured: $0.00

Details

This is the "Ready to Fly" version of the QAV500 V2 FPV Quadcopter. Fully built, tested and ready to fly.

Please make your selections above to customize your build.

Purchasing Tips:

  • Arm length + propeller combinations
    • 500mm sized arms - up to 10" props
    • 520mm sized arms - up to 11" props
    • 540mm sized arms - up to 12" props (13" possible by moving spacers)
  • If you check the "radio setup fee" and add a radio controller to your purchase we can set it up for you during the building process, or you can ship us your current radio and receiver as well. If you choose to send us your radio and receiver, please send it (fully charged)  to the following address with your order # included.

    GetFPV
    1127 Goodrich Ave.
    Sarasota, FL 34236 

The airframe that introduced the Clean/Dirty H-Frame concept to the world in 2012 has now been significantly upgraded in this new version. This airframe replaces both the original QAV500 as well as the QAV540G. The QAV500 V2 adds the ability to mount Lumenier's quick mount gimbal, which enables one airframe to be flown both as an acrobatic airframe carrying a fixed GoPro as well as aerial videography airframe with 2-axis gimbal. When purchasing the new QAV500 V2, you now have a choice of arms in different lengths and materials. Arm choices include the original aluminum CNC-ed 500 arms for a 500mm size airframe (measured from motor shaft to motor shaft diagonally), 500mm size G10 arms, 520mm size G10 arms, or long 540mm aluminum arms. The new QAV500 V2 now features a significantly stiffer Dirty Airframe, which is most noticeable when utilizing the longer 520 and 540 size arms.

With 500mm arms, the frame supports a 10 inch prop without seeing props in the video with a fixed or gimbal stabilized GoPro. With a 540mm arm, mounting up to a 12 inch prop is supported without props in view when flown with the Quick Mount Gimbal. With 12 inch props, flight times of 25 minutes or more are possible when utilizing appropriate motors, props, and lipos.

QAV500 Carbon Fiber Side-WallThe improved Dirty section of the airframe has been stiffened by implementing curved carbon fiber side-walls combined with a carbon fiber bottom plate and re-designed power distribution board. The new power distribution board features integrated, orientation-aiding LED lights, 2 separate voltage conversion circuits with an included 12v step-down board, and redesigned layout to easily fit a wide variety of ESCs inside the Dirty frame's cavity.

The Clean section of the airframe now features a total of 6 Orange RC Bobbins which have been utilized in all of Lumenier's Clean/Dirty airframes with incredible results. The added bobbin pair prevents the clean section to sag in the center of the airframes. The Clean section now also features a retaining mechanism that prevents the two airframe sections to separate and bobbins to rip apart in the event of a crash. The Clean section features a longer top plate that stiffens the back of the airframe when used with larger, heavier lipo batteries. Furthermore, the larger Clean section provides increased room to mount FPV and other electronics. GPS mounting is made easy with dedicated GPS mounting locations in the center or back of the airframe.

QAV500 V2


Features

  • Stiffened Dirty section with innovative curved carbon fiber side-walls and carbon fiber dirty plate
  • Improved power distribution board with integrated LED lighting for orientation and LOS visibility powered by 3s or 4s flight pack
  • 3 independent voltage circuits: main flight pack voltage (4 cell recommended), 12v circuit with included 12v step-down, extra circuit for optional step down/up
  • Bobbin retainer posts that prevent airframe separation in the event of a crash protecting bobbins and wiring
  • Ability to attach and remove Lumenier's Quick-Mount gimbal in around 20 seconds (Gimbal is available separately)
  • GoPro mounting plate that can be removed when airframe is exclusively flown with Lumenier Gimbal
  • Airframe can be purchased with 4 different arm configurations: 500mm (Aluminum), 500mm (G10), 520mm (G10), and 540mm (Aluminum)
  • Optional accessories include a variety of landing gear options and board camera mount that can be placed in 2 different positions at the bottom of the Clean section
  • Dedicated mounting hole for video transmitter SMA adapter
  • All plates and arms available as spares and crash replacements
  • 25 minute flight time with appropriate motors, props, and battery pack

Specifications

  • Weight 
    • (Airframe + 500mm aluminum arms): 526g
    • (Airframe + 540mm aluminum arms): 543g
    • (Airframe + 500mm G10 arms): 522g
    • (Airframe + 520mm G10 arms): 536g
  • Size (airframe only without arms): 452mm x 115mm x 65mm (no landing gear)
  • Suggested Lipo: 4s 35c 3300mAh, 4200mAh, or 5200mAh (depending on payload)

Accessories & Replacement Parts

  • QAV Board Camera Mount
  • Multiple Landing Gear Options
  • Individual replacement of all frame plates

Includes

  • 1x Fully built QAV500 V2 FPV Quadcopter
  • Parts include
    • 1x QAV500 Power Distribution Board
    • 1x QAV500 Carbon Fiber Dirty Frame Plate
    • 2x Carbon Fiber Side Wall Plates
    • 1x QAV500 G10 Clean Frame Base Plate
    • 1x QAV500 Flight Controller Cover Plate
    • 1x GoPro Camera Plate
    • 1x Set of Hardware with Allen Key and Lipo Strap
    • 6x Orange RC Bobbins
    • 1x XT60 Lipo Pigtail 12AWG
    • 1x 12V Step-Down Voltage Regulator

Optional Extras

Patents Pending. Clean/Dirty Airframe Separation is a Trademark by Lumenier.

Videos

Additional Information

SKU 2324
 

You may also be interested in the following product(s)

Lumenier 5200mAh 4s 35c Lipo Battery

Lumenier 5200mAh 4s 35c Lipo Battery

$74.99
Professional Travel Case for the QAV500

Professional Travel Case for the QAV500

$399.99