Welcome to GetFPV

OverSky Scisky Micro F3 Brushed Flight Control built-in RX option, DSMX/DSM2

Be the first to review this product

In Stock

Regular Price: $43.90

Special Price $34.99

OR

Quick Overview

The Scisky F3 brushed flight control board based on F3 EVO hardware, supports CleanFlight and BetaFlight firmware.

OverSky Scisky Micro F3 Brushed Flight Control built-in RX option, DSMX/DSM2

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Scisky F3 brushed flight control board based on F3 EVO hardware, supports CleanFlight and BetaFlight firmware. There are 3 kinds of hardware for its built-in compatible receiver: A---CYRF6936, B---CC2500,C---A7105. There are 6 option protocols for the built-in compatible receiver: 1=>DSMX/2; 2 =>DEVO (on testing); 3 =>Futaba SFHSS; 4=> FrSky (on testing); 5=> FlySky AFHDS; 6=>Hubsan;

MX VTX 25MW module (video transmitter) can be plugged and installed on Scisky F3 brushed flight control board directly, no soldering is needed, and also you can plug and play MX VTX-25MW & OSD and the analog camera

Features

  • STM32F303CCT6 main controller
  • MPU6500 sensor (SPI way)
  • 6 optional built-in receivers
  • Onboard 5V/1000mA DCDC booster circuit
  • 4 built-in brushed ESCs (each brushed ESC can support current up to 6A)
  • No need soldering for installing VTX-25MW module or VTX-25MW & OSD module (note: analog VTX is 40CH)
  • Every built-in receiver on the board outputs receiver signal in the same 8CH PPM format and order, the channel number depends on customer’s transmitter
  • Customer can set up the working frequency of VTX according to his own request through transmitter
  • Ports diagram (same on all of the Scisky F3 brushed FCs)

5.8G VTX channels list

LED1

LED2

LED3

LEDA  LEDB  LEDC

 

 

 

000

001

010

011

100

101

110

111

0

0

0

 5740M 

 5760M 

 5780M 

 5800M 

 5820M 

 5840M 

 5860M 

 5880M 

0

0

1

 5865M

 5845M

5825M

5805M

5785M

5765M

5745M

5725M

0

1

0

 5733M

 5762M

5771M

5790M

5809M

5828M

5847M

5866M

0

1

1

 5705M

 5685M

5665M

5645M

5885M

5905M

5925M

5945M

1

0

0

 5658M

 5695M

5732M

5769M

5806M

5843M

2880M

5917M


Frequency checking and setting up on analog video transmitter

6 LED lights on the board indicates the working frequency of the video transmitter in binary calculation way, LED 1, LED 2, LED 3 represent 5 groups of frequency, LED A, LED B and LED C show 8 frequencies.
Pull the throttle to lowest, press the button slightly, you can check the current working frequency of the VTX (LED lights flash twice); Push the throttle to mid range, double press the button and then enters frequency set up mode; The LED light group shows the current working frequency when the VTX enters frequency set up mode, push or pull Elevator stick up and down, you can change the frequency groups (5 groups), pull Aileron stick right or left, you can change frequency points (8 frequency points in total); After finishing frequency set up, pull or push the throttle stick to highest or lowest position, frequency set up mode quits and the frequency changes to the set up frequency which is save on VTX, LED group lights flashes twice indicates the finished operation.

Additional Information

SKU 6839
Manufacturer OverSky
 

You may also be interested in the following product(s)

FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2)

FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2)

$239.99
Fat Shark Transformer HD Full Viewer Bundle FPV Headset

Fat Shark Transformer HD Full Viewer Bundle FPV Headset

$248.99